Privilege level commands are removing themselves

[MichelWilfred]

We have a series of switches that we have created an account for a user to only be allowed to set port descriptions and change vlans. Randomly, the user can no longer change vlans. Below are the commands I used.

Thanks

privilege exec level 8 conf t
privilege exec level 8 copy run start
privilege configure level 8 interface
privilege interface level 8 switchport access vlan
privilege interface level 8 description
privilege exec level 8 copy run start
file privilege 8

[balaji.bandi]

what Device Models, and what IOS Code running.

May be you can give higher priv level and control only for some commands.

For better these kind of work i always suggested to use external Radius/TACACS. (like ISE or RADIUS)