11-27-2012 11:17 AM - edited 03-07-2019 10:16 AM
Hi All,
I want classify and marking traffic on access port with C3750x Ios:12.2(58)SE2 Lanbase but i don't have any packet.
With the same configuration on C6500 it's ok.
Here my configuration on Switch:
!
interface GigabitEthernet1/0/1
switchport access vlan 25
switchport mode access
service-policy input policy-port-PM
!
mls qos
mls qos map cos-dscp 0 8 16 26 32 46 48 56
!
class-map match-all gold-CM
description Classification des flux Gold
match access-group name multicast-gold-ACL
class-map match-all bronze-CM
description Classification des flux Bronze
match access-group name bronze-ACL
class-map match-all silver-CM
description Classification des flux Silver
match access-group name silver-ACL
class-map match-all priority-queue-CM
description Classification des flux voix
match access-group name priority-ACL
!
policy-map policy-port-PM
class priority-queue-CM
set dscp ef
class gold-CM
set dscp af41
class silver-CM
set dscp af31
class bronze-CM
set dscp af21
class class-default
set dscp default
!
!
ip access-list extended bronze-ACL
permit ip any 192.168.23.0 0.0.0.255
ip access-list extended multicast-gold-ACL
permit ip any 239.0.0.0 0.255.255.255
ip access-list extended priority-ACL
permit ip any 10.239.25.0 0.0.0.255
permit ip any 192.168.24.0 0.0.0.255
ip access-list extended silver-ACL
permit ip any 192.168.21.0 0.0.0.255
!
Here result:
!
sh policy-map int gi1/0/1
GigabitEthernet1/0/1
Service-policy input: policy-port-PM
Class-map: priority-queue-CM (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name priority-ACL
Class-map: gold-CM (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name multicast-gold-ACL
Class-map: silver-CM (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name silver-ACL
Class-map: bronze-CM (match-all)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: access-group name bronze-ACL
Class-map: class-default (match-any)
0 packets, 0 bytes
5 minute offered rate 0 bps, drop rate 0 bps
Match: any
!
Thanks for your help
Solved! Go to Solution.
11-27-2012 01:04 PM
Hi,
Please look at the link to the config guide
Table 37-15 Commands for Displaying Standard QoS Information
Regards,
Alex.
Please rate useful posts.
11-27-2012 01:04 PM
Hi,
Please look at the link to the config guide
Table 37-15 Commands for Displaying Standard QoS Information
Regards,
Alex.
Please rate useful posts.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide