cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
18797
Views
0
Helpful
3
Replies

Problem with Primary Cisco Nexus 1000v hangs on loader loading, please wait

We hit a problem with our Nexus 1000v which runs in HA mode.

Version of the Nexus 1000v: 4.2(1)SV1(5.2)

Our primary Nexus 1000v does not complete booting, it hangs on message:

loader loading stage1.5.

Loader loading, please wait.........

Command "show sys redundacy status" on our active system shows:

Redundancy role

---------------

      administrative:   secondary

      operational:   secondary

Redundancy mode

---------------

      administrative:   HA

      operational:   None

This supervisor (sup-2)

-----------------------

    Redundancy state:   Active

    Supervisor state:   Active

    Internal state:   Active with warm standby

Other supervisor (sup-1)

------------------------

    Redundancy state:   Standby

    Supervisor state:   Unknown

    Internal state:   Other

When we do a copy run start, we get the following message:

[######################################] 100%

Configuration update aborted: request was aborted.

Does anybody know the answer to resolve this problem.

3 Replies 3

plooney01
Level 1
Level 1

I have this issue too? Any ideas

Cisco TAC solved the problem, but this week the problem occurred again and we opened a new TAC case...

Problem was solved by Cisco TAC and is related to bug: CSCtz15346

/mnt/pss directory growing too large and having no free space

See: https://tools.cisco.com/bugsearch/bug/CSCud63249

You need a Cisco account to view the information in the link.

Review Cisco Networking products for a $25 gift card