cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
172
Views
0
Helpful
1
Replies
Highlighted

Promiscuous port mapping to different Isolated PVLANs within a single Primary PVLAN?

Hello,

 

I am working on a unique system & switch configuration where there are middle-man workstations that communicate with each other and a community of servers. Each workstation must also be able to communicate with one single isolated workstation/PC. This is all being configured on one Catalyst 3650 switch. Below is a diagram depicting the goal of the project.

Private VLAN Cisco Network Diagram.png

I have been able to create the proper communication between VLAN 201 (i.e servers), WS-1, and VLAN 202 (isolated PC 1) with this config guide https://learningnetwork.cisco.com/docs/DOC-16110. With  my current configuration, WS-1 can ping VLAN 202 and VLAN 201 but VLAN 201 and VLAN 202 cannot ping each other. 

 

When I attempt to expand the configuration by adding a second workstation and isolated VLAN to the primary VLAN  I am getting errors stating that only 1 isolated VLAN can be associated with the primary VLAN.

Switch(config)#int Gi1/0/11
Switch(config-if)#switchport mode private-vlan promiscuous

Switch(config-if)#switchport private-vlan mapping 2 203
%Command rejected: invalid private vlan association between vlan2 and vlan203. Isolated VLAN 202 is already associated with VLAN 2.
Switch(config-if)#exit

 

Is it possible to configure promiscuous ports with there own isolated PVLAN as a workaround to avoid having multiple isolated PVLANS on the Primary PVLAN?

 

Is this config even viable for what I am looking to accomplish? 

Thanks!

 

Current Config Info

Primary Secondary Type              Ports
------- --------- ----------------- ------------------------------------------
2       201       community         Gi1/0/1, Gi1/0/10, Gi1/0/11
2       202       isolated          Gi1/0/10, Gi1/0/20
none    203       isolated

!
vlan 2
 name prim-vlan
  private-vlan primary
  private-vlan association 201-202
end

!
vlan 201
 name server-comm
  private-vlan community
end

!
vlan 202
 name iso-1
  private-vlan isolated
end

!
vlan 203
 name iso-2
  private-vlan isolated
end

!
interface GigabitEthernet1/0/1
 switchport private-vlan host-association 2 201
 switchport mode private-vlan host
end

!
interface GigabitEthernet1/0/10
 switchport private-vlan mapping 2 201-202
 switchport mode private-vlan promiscuous
end

Current configuration : 120 bytes
!
interface GigabitEthernet1/0/11
 switchport private-vlan mapping 2 201
 switchport mode private-vlan promiscuous
end

!
interface GigabitEthernet1/0/20
 switchport private-vlan host-association 2 202
 switchport mode private-vlan host
end

!
interface GigabitEthernet1/0/21
end

 

1 REPLY 1
Beginner

Re: Is it possible for a Promiscuous Switch Port to associate/map to multiple Primary Private VLANs?

Hi,
I don't think you can do it with this MITM computers on the path. I suggest to make inter-vlan routing and with ACLs limit which hosts/vlans can comunicate with others
CreatePlease to create content
Content for Community-Ad
July's Community Spotlight Awards