proxy arp on interface

[suthomas1]

Hi,

Which command will indicate if proxy arp is running actively on either the router as a whole or any specific interface.

thanks in advance!

[cadet alain]

Hi,

sh run | i arp proxy  and sh ip int | i Proxy

Regards.

Alain

Don't forget to rate helpful posts.

[suthomas1]

Thanks Alain. but these commands are not accepted on the router, looks like an old IOS running.

Do we have any other command or way to find out this?

[Raju Sekharan]

Hi

"Show ip interface" is very old command and it is present from 10.0

http://www.cisco.com/en/US/docs/ios/12_0/interface/command/reference/irshowip.html

Thanks

Raju

[cadet alain]

Hi,

Maybe the IOS filtering is not a feature of your IOS then do sh ip interface and sh run.

Regards.

Alain

Don't forget to rate helpful posts.