10-16-2012 09:36 AM - edited 03-07-2019 09:30 AM
I have a problem with QoS on a switch 3560, receiving labeled packets with AF32 but after going through the switch come in default
I have configured my switch
mls qos map cos-dscp 0 8 16 24 32 46 48 56
mls qos
and the port of my switch is configured
mls qos trust dscp
I have an idea that is not defined because they recognize AF32 packets.
my theory is correct?
I hope you can help me solve my doubt
regards
10-16-2012 10:04 AM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
Is that trust statement on th ingress port, egress port or both ports?
No other QoS statements configured?
10-16-2012 10:17 AM
at the input port I have configured
mls qos trust cos
and I have terminal device
mls qos trust dscp.
are the only policies configured
10-16-2012 05:06 PM
Disclaimer
The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
Liability Disclaimer
In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
Posting
The trust COS is the likely problem. If you want to use AF32, you need to trust DSCP, not COS.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide