question about apply policy based routing to virtual template interface at preceding of radius server

[Dr.X]

hi ,

                                   radius server

                                      |

assume i have , R1-----------SW-----------------R2

                                      |

                                      |

                                      |

                                     R2

note that im applying pbr on a virtual template interface ,

i mean subnet x  ====> go to r2

and subnet y =======> go to r2

but im facing a problem , hwich is the AAA operation must be done between R1 and radius ,

and if i applied the pbr on R1 , the polivcy will be rejected , and go to normat routing table ,

i checked debug for pbr snd here is result :

Oct 15 15:49:37.902: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 40, FIB policy match

Oct 15 15:49:37.902: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 40, PBR Counted

Oct 15 15:49:37.902: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 40, FIB policy rejected - normal forwarding

Oct 15 15:49:38.650: IP: s=x.x19.150 (Virtual-Access5), d=10.160.150.103, len 464, FIB policy match

Oct 15 15:49:38.650: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 464, PBR Counted

Oct 15 15:49:38.650: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 464, FIB policy rejected - normal forwarding

note that the ip

10.160.150.103

is the radius server ip !!!!!!!!!!!1

any advice ??

regards

[srikanth ath]

Hello

Kindly, represent the traffic flow with a clear diagram as so we can look into your issue.

Regards

srikanth

[Dr.X]

hi , im very sorry for  about the diagram ,

here is the diagram i  painted :

regards

Ahmad

[srikanth ath]

Hello

Sorry bro. i couldnt open this file, can u provide this in another format JPEG,  and attach it here.if you are unanble to provide this.

If someone can view above format, please help out/.

Regards,

srikanth