10-15-2012 09:03 AM - edited 03-07-2019 09:28 AM
hi ,
radius server
|
assume i have , R1-----------SW-----------------R2
|
|
|
R2
note that im applying pbr on a virtual template interface ,
i mean subnet x ====> go to r2
and subnet y =======> go to r2
but im facing a problem , hwich is the AAA operation must be done between R1 and radius ,
and if i applied the pbr on R1 , the polivcy will be rejected , and go to normat routing table ,
i checked debug for pbr snd here is result :
Oct 15 15:49:37.902: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 40, FIB policy match
Oct 15 15:49:37.902: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 40, PBR Counted
Oct 15 15:49:37.902: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 40, FIB policy rejected - normal forwarding
Oct 15 15:49:38.650: IP: s=x.x19.150 (Virtual-Access5), d=10.160.150.103, len 464, FIB policy match
Oct 15 15:49:38.650: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 464, PBR Counted
Oct 15 15:49:38.650: IP: s=x.x.19.150 (Virtual-Access5), d=10.160.150.103, len 464, FIB policy rejected - normal forwarding
note that the ip
10.160.150.103
is the radius server ip !!!!!!!!!!!1
any advice ??
regards
10-15-2012 09:11 PM
Hello
Kindly, represent the traffic flow with a clear diagram as so we can look into your issue.
Regards
srikanth
10-16-2012 10:30 AM
hi , im very sorry for about the diagram ,
here is the diagram i painted :
regards
Ahmad
10-16-2012 10:33 PM
Hello
Sorry bro. i couldnt open this file, can u provide this in another format JPEG, and attach it here.if you are unanble to provide this.
If someone can view above format, please help out/.
Regards,
srikanth
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide