10-16-2012 08:28 PM - edited 03-07-2019 09:30 AM
6500 - version (s72033_rp-ENTSERVICESK9_WAN-M), Version 12.2(18)SXF17a
I have two ISP's. I have created two defaults as follow & secondary route does not work.
ip route 0.0.0.0 0.0.0.0 X.X.X.X
ip route 0.0.0.0 0.0.0.0 Y.Y.Y.Y 200 (secondary route)
router eigrp 1
redistribute static
My Configuration : ISP1<-->FW1<--->6513-1<---->6513-2<----->FW2<----->ISP2
|
PC1
After disabling the interface to ISP1, backup routes does not work.
Any suggestion?
switch>sh ip route 0.0.0.0
6513-2#sh ip route 0.0.0.0
Routing entry for 0.0.0.0/0, supernet
Known via "static", distance 1, metric 0, candidate default path
Redistributing via eigrp 8000
Advertised by eigrp 8000
Routing Descriptor Blocks:
* X.X.X.X
Route metric is 0, traffic share count is 1
10-16-2012 09:40 PM
Hello,
First of all,
If you check the Topology table on the Switch side (EIGRP neighbor) Do you see the feassible sucessor entry for that default route????
Let me know that,
Remember to rate all of the forum answers,
Julio
10-16-2012 09:44 PM
I see following route "sh ip eigrp topology
P 0.0.0.0/0, 1 successors, FD is 2816
via Rstatic (2816/0)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide