05-17-2013 05:56 AM - edited 03-07-2019 01:24 PM
Hello,
I am moving from 877 12.4(15) to 887VA-M 15.1(4)M5. In the old configuration I have:
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
In the new router/IOS, the command "dsl operating-mode...." isn't supported under interface ATM0. Was wondering if the syntax changed or..?
10x,
Solved! Go to Solution.
05-17-2013 07:48 AM
Hi,
some of the config for the 887 has moved in to the vdsl controller
!
controller vdsl 0
operating mode auto
!
This link will help you
Regards,
Alex.
Please rate useful posts.
05-17-2013 07:48 AM
Hi,
some of the config for the 887 has moved in to the vdsl controller
!
controller vdsl 0
operating mode auto
!
This link will help you
Regards,
Alex.
Please rate useful posts.
05-19-2013 11:04 PM
Thanks acampbell !
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide