"show parser dump" command...

[rezaalikhani]

Hi all;

One of the valuable commands in IOS 12.x was 'show parser dump'. As you can see below, by executing this command, you can find which command must be executed in which privilege level:

But, unfortunately, this command is not available in IOS from version 15 and above:

Is there an alternative method that someone can be aware of in newer IOSs?

Thanks

[balaji.bandi]

Looks like the command removed - if that is command needed either need to go back to old IOS - which i dont recommend,

Command History

Release	Modification
12.2(4)T	This command was introduced.
12.2(13)T	This command was enhanced to resolve certain execution errors.
12.0(23)S	This command was enhanced to resolve certain execution errors.
15.0(1)M	This command was removed.

https://www.cisco.com/c/en/us/td/docs/ios/fundamentals/command/reference/cf_book/cf_s3.html

[Ruben Cocheno]

@rezaalikhani 

You probably can use some Ansible, PyATS for the same job, give it a go. That was removed as mentioned by @balaji.bandi