cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
210
Views
1
Helpful
3
Replies

%RADIUS-4-RADIUS_DEAD

Jason2005
Level 1
Level 1

Trying to authenticate I have this error as shown, can anyone help me!

*May 11 12:38:20.482: %RADIUS-4-RADIUS_DEAD: RADIUS server 192.168.100.3:1812,18 13 is not responding.
*May 11 12:38:20.482: %RADIUS-4-RADIUS_ALIVE: RADIUS server 192.168.100.3:1812,1 813 is being marked alive.

3 Replies 3

M02@rt37
VIP
VIP

Hello @Jason2005 

Your equipement is unable to reach RADIUS server. So you can log in with local credentials. An other time, RADIUS reachability is ok! So network issue somewhere.

Verify network connectivity to resolve that issue.

 

Best regards
.ı|ı.ı|ı. If This Helps, Please Rate .ı|ı.ı|ı.

balaji.bandi
Hall of Fame
Hall of Fame

In addition to other post.

1.what device model, what IOS code running 

2. what Radius server you have ?

3. how is the reachability between device and radius ?

4. is this only one device complaining about it ?

5. is there any network stability issue around ?

6. what other logs you see apart from that ?

7, what source interface you using to reach radius ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

If you see these messages it suggests that you have some access to this device (console or something else). Can you verify what access you have to the device?

Has this worked before now and the failure is after successful authentication for this device? Or is this a new device?

Can you confirm that the device at 192.168.100.3 has a correct configuration for this device?

Are there log messages on the device at 192.168.100.3 about attempts from this device?

HTH

Rick
Review Cisco Networking for a $25 gift card