Radius authentication failed

Ha Dao · ‎05-17-2020

Hi guys

I am trying to configure authentication login with radius server. This configuration is working fine with 2960, 3860, but something wrong with my 4507

- From 2960, 3860: user privilege 15 and privilege 1 are authenticated right, i can see everything by "debug radius; terminal monitor"

- From 4507: user privilege 15 is authenticated fine, but user privilege 1 is not authenticated, and the crazy thing is that i can not see log with these commands "debug radius; terminal monitor" even user is authenticated or not.

I post my brief configuration here by image, because my older posts are marked as spam (don't know why)

marce1000 · ‎05-18-2020

- What's in the radius server's logs for these particular attempts, also note if there is any difference in the server's logs for the switch-models were the authentication is working properly.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

Meheretab Mengistu · ‎05-18-2020

Hi Ha,

Just curios, I do not see a local user of privilege level 1. That means, it will be checked only on the radius server. Is that correct?

HTH,
Meheretab

Ha Dao · ‎05-18-2020

the user xxx pri 15 is local for backup. On radius server i have 2 users, once is pri 15 and other's is pri 1