06-13-2015 01:47 AM - edited 03-08-2019 12:32 AM
Please who can help me, I have deleted the flash then copied the image flash:c2960-lanbasek9-tar.150-2.SE6 by using xmodem but when I want to boot the Image displays this error message:
switch: boot flash:c2960-lanbasek9-tar.150-2.SE6
Loading "flash:c2960-lanbasek9-tar.150-2.SE6"...flash:c2960-lanbasek9-tar.150-2.
SE6: magic number mismatch: bad mzip file
regards
Solved! Go to Solution.
06-15-2015 03:33 AM
If you want to load the IOS (BIN file) back to the appliance, then you'll need to read THIS.
06-15-2015 09:32 PM
06-13-2015 02:05 AM
magic number mismatch: bad mzip file
Means the IOS you're trying to boot is corrupt: It failed MD5 hash check.
06-13-2015 03:37 AM
[+5] to Leo.
The IOS which u have downloaded is corrupt.
After u download it, you can check the integrity by running MD5 checksum utility on PC.You can download FastSum utility by doing google.
You can also run the command verify MD5 in switch to check the same.
regds,
aman
06-14-2015 12:21 AM
Thanks, aman
I tried, but I still have the same problem!!
06-17-2015 02:27 PM
This discussion has been reposted to the LAN, Switching and Routing community.
06-13-2015 11:35 PM
Hi dler.mawlod ,
You have copped a zip file so first unzip it and copy .bin file which is IOS extension.
falsh:c2960-lanbasek9-150-2.SE6.bin
like this extension
Thanks
Kafi
06-14-2015 12:20 AM
Thank you, Kafi,
but, I did it, and I used another Image(c2960-lanbasek9-tar.150-2.SE6.tar), but I got the same problem !!
06-14-2015 01:28 AM
Hi dler.mawlod,
your extension c2960-lanbasek9-tar.150-2.SE6.tar
Thnaks
06-14-2015 02:43 AM
what is the exact switch model u are using?
Please share that.
regds,
aman
06-15-2015 01:00 AM
catalyst 2960 series
06-15-2015 01:31 AM
the reason for asking correct model is that whether u are downloading the correct IOS for switch.
regds,
aman
06-15-2015 03:33 AM
If you want to load the IOS (BIN file) back to the appliance, then you'll need to read THIS.
06-15-2015 12:59 AM
yes. what is wrong ?
thanks
06-15-2015 09:32 PM
ios extension is
c2960-lanbasek9-tar.150-2.SE6.bin
thanks
06-17-2015 11:56 PM
Thanks, you are right , I changed the IOS image with extension .bin
then uploaded successfully
.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide