Reduce 802.1x Interface template

[Aamir Bhatti]

Hello All,

We recently adopted Dot1x with IBNS 1.0 on out access switches. For management and better control we want to reduce the commands on the ports. We cannot use templates/macros as below commands are not supported by it. We also cannot use aaa policy as we dont have advance license. Do anyone have any idea here?

authentication order dot1x mab
authentication priority dot1x mab
authentication port-control auto
authentication control-direction in
authentication event fail action next-method
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication periodic
authentication timer reauthenticate server
authentication timer inactivity server dynamic

[Jens Albrecht]

Hi, what is the exact platform and software version you are talking about?

[Aamir Bhatti]

Hi @Jens Albrecht, we are using mostly 9000 series(CAT9K_LITE_IOSXE, Version 17.9.5) and some C2960X Software (C2960X-UNIVERSALK9-M) switches. 

[Rich R]

So this is a question about switch port configuration, not wireless, so I'll move it to the switching board.

[MHM Cisco World]

Check this 

https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-x-series-switches/207193-Configure-IBNS-2-0-for-Single-Host-and-M.html

MHM