Registering MAC address to switch port

[zachmpeniel]

I would like to know how to assigne a particular MAC address only to get access throgh a particular port on cisco 2924xl switch.I want to avoid undeserved users to get connected to the LAN by regisgtering the MAC address of the real user to the port they

are connected to.

[spremkumar]

hi

I feel you can do this with switchport port-security command ..

do refer this link on how to go about in this..

http://www.cisco.com/univercd/cc/td/doc/product/lan/cat4000/12_2_20a/cmdref/snmp_vtp.htm#wp1144883

regds

[Bobby Thekkekandam]

Since the 2900XL switches run CatIOS, which is similar to IOS, but often times with different syntax, here's the 2900XL specific document for port security:

http://www.cisco.com/univercd/cc/td/doc/product/lan/c2900xl/29_35wc6/scg/swports.htm#31465

[zachmpeniel]

Thank u very much for ur reply and document. I will work out on it and surely be in touch further if needed and would like to inform on completion of work

that I needed to do this way.