06-13-2013 10:16 AM - edited 03-07-2019 01:52 PM
Hello all,
I have reconfigured the FEX numbers attached to a Nexus 5548 running on NXOS5.2 If I do show running-config the interfaces are not there anymore. But if I do show startup-config the old Fex interfaces still shows up. I did try write erase then saved the running-config and its still there. Can you help me how to remove this from the startup-config.
Thanks,
Mike
06-13-2013 10:41 AM
Hi,
I have never tried that before, but after deleting it and save, you may want to reboot the switch and see if the old FEX number goes away.
HTH
10-20-2013 01:47 PM
Just curious if you ever got this issue resolved, or if a reboot solved your issue. I'm having the same issue with a pair of my Nexus 5K's.
10-21-2013 10:21 AM
I opened a TAC case regarding this. The technician said to erase the startup config and reboot the switch without saving the running config. Once the switch has rebooted, reapply the configuration.
Not the ideal way to address the issue... but alas, it is a known bug. As best I can tell it doesn't actually cause any issues aside from my configuration monitoring always saying that the startup-config is different than the running-config.
10-21-2013 10:26 AM
Thanks for the update. I figured it was cosmetic only, but like you said, the configuration monitor always alerts so it'd be nice to fix.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide