04-23-2010 04:43 PM - edited 03-06-2019 10:46 AM
Do anyone knows if the new catalyst 3750X supports the Resilient Ethernet Protocol (REP).
Thanks
04-24-2010 02:06 AM
Do anyone knows if the new catalyst 3750X supports the Resilient Ethernet Protocol (REP).
Thanks
Unfortunately no it isn't. The 3750X uses the same IOS feature sets as the 3750-E and according to Feature Navigator there is no support for REP. Of the 3750 switches only the 3750 Metro switches have support for REP.
Jon
04-26-2010 12:00 AM
Do anyone knows if the new catalyst 3750X supports the Resilient Ethernet Protocol (REP).
Thanks
Hi,
Check out the below link for more information
http://www.cisco.com/en/US/solutions/collateral/ns341/ns524/ns562/ns577/case_study_c36-495769.html
Hope to Help !!
Remember to rate the helpful post
Ganesh.H
09-04-2013 12:46 PM
Release Notes for Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switches, Cisco IOS Release 15.0(2)SE and Later
New in Cisco IOS Release 15.0(2)SE
•Support for Resilient Ethernet Protocol (REP) is added for the IP Base package. REP is a Cisco proprietary protocol that provides an alternative to Spanning Tree Protocol (STP) to control network loops, handle link failures, and improve convergence time in ring topologies. REP controls a group of ports connected in a segment, ensures that the segment does not create any bridging loops, and responds to link failures within the segment. REP also supports VLAN load balancing. (IP Base image for Catalyst 3750-X, 3560-X, 3750-E and 3560-E switches.)
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide