Replacement switch for WS-C3650-12X48UZ-L with 40G

[AndreasKvist]

Hello, 

I have a customer that wants a WS-C3650-12X48UZ-L but delivery times are long. 

In the 9300 series, what can replace this switch?

BR

Andreas

[MUHAMMAD TAYYAB MUNIR]

Hi @AndreasKvist

you can replace it with 9300 Multigigabit switch.

https://www.cisco.com/c/en/us/products/switches/catalyst-9300-series-switches/index.html

BR

Tayyab

[Mark Malone]

Hi
9300 nexus would have 40gb , but 9300 campus wont

good tool for selecting switches on the website
https://www.cisco.com/c/en/us/products/switches/switch-selector.html

[AndreasKvist]

hello, 

Thanks for responding so quickly. 

But there are a 40g module for the 9300 platform. C9300-NM-2Q=

That would be sufficiant for a C9300-24UX or C9300-48UXM?

[Mark Malone]

yes could use that , i presumed you were looking for a 40gb switch rather than module 40gb uplink , that's why was thinking nx switch 9k you can get as there like 32 x 40gb etc rather than just the 2 port , but that module should be fine if thats all you require

best off going with newer 9k anyway as the 3ks will become EOL before them so the customer will get a longer run with it before having to replace it

[MUHAMMAD TAYYAB MUNIR · Accepted solution]

HI @AndreasKvist

The mentioned module C9300-NM-2Q= for the uplink ports 2x40G.

BR

Tayyab