cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
794
Views
5
Helpful
5
Replies

Replacement switch for WS-C3650-12X48UZ-L with 40G

AndreasKvist
Beginner
Beginner

Hello, 

 

I have a customer that wants a WS-C3650-12X48UZ-L but delivery times are long. 

 

In the 9300 series, what can replace this switch?

 

BR

 

Andreas

1 Accepted Solution

Accepted Solutions

HI @AndreasKvist

 

The mentioned module C9300-NM-2Q= for the uplink ports 2x40G.

 

BR

Tayyab

*** Please rate all helpful responses and mark solutions***

View solution in original post

5 Replies 5

Hi @AndreasKvist

 

you can replace it with 9300 Multigigabit switch.

 

https://www.cisco.com/c/en/us/products/switches/catalyst-9300-series-switches/index.html

 

BR

Tayyab

 

*** Please rate all helpful responses and mark solutions***

Mark Malone
VIP Alumni
VIP Alumni
Hi
9300 nexus would have 40gb , but 9300 campus wont

good tool for selecting switches on the website
https://www.cisco.com/c/en/us/products/switches/switch-selector.html

hello, 

 

Thanks for responding so quickly. 

 

But there are a 40g module for the 9300 platform. C9300-NM-2Q=

 

That would be sufficiant for a C9300-24UX or C9300-48UXM?

yes could use that , i presumed you were looking for a 40gb switch rather than module 40gb uplink , that's why was thinking nx switch 9k you can get as there like 32 x 40gb etc rather than just the 2 port , but that module should be fine if thats all you require

best off going with newer 9k anyway as the 3ks will become EOL before them so the customer will get a longer run with it before having to replace it

HI @AndreasKvist

 

The mentioned module C9300-NM-2Q= for the uplink ports 2x40G.

 

BR

Tayyab

*** Please rate all helpful responses and mark solutions***
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: