06-11-2013 01:03 PM - edited 03-07-2019 01:50 PM
Will Resilient Ethernet Protocol (REP) run on all Cisco switches (2960S and 3010) or is it only available on Service Provider switches like the ME3400E?
06-12-2013 12:48 AM
Hello Greg,
my personal impression is that REP will be supported on SP oriented switches and on industrial ethernet switches.
I'm not a Cisco guy so this is just my idea.
Hope to help
Giuseppe
06-12-2013 01:58 AM
Hello,
REP (Resilient Ethernet Protocol) is supported on:
The CAT2960C405 should have 12.2(55)EX1, 2 or 3 to get this feature set. The 2960S is not there in the list, but maybe because its a newer switch, not too sure. The IE3010 is in the list.
Search the Cisco Feature Navigator here: http://tools.cisco.com/ITDIT/CFN/jsp/by-feature-technology.jsp
Hope this helps
Please rate useful posts & remember to mark any solved questions as answered. Thank you.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide