route-map for send ibgp route to ebgp neighbour if metrix

[julxu]

on asr1004, can I config to check a subnet metric if it is 30 (an example) than send the subnet to neighper with staticly set metrix to 35?

another way to say, can I do:

route-map to-neigher permit 5

   match metrix 30

   set metrix 35

Please ad

Julxu

[Pawan Raut · Accepted solution]

Yes youcan do that but make sure if you want to send other subnet as it is then you have to add one more permit  line in route-map

route-map to-neigher permit 5
match metric 30
set metric 35
!
route-map to-neigher permit 10
!

router bgp xxx

 nei xxxx route-map to-neigher out

!

Kindly rate for useful post

[julxu]

Hi Pawan

Great thanks for the advicd.

The permit 10 do not need anything else, some thing like match or set? please confirm.

Many Regards

Julxu

[Pawan Raut]

by default permit statement in route allow everything if we not set any condition like match