07-15-2013 04:20 PM - edited 03-07-2019 02:25 PM
Hi,
End user has a new 3925 router with c3900-universalk9-mz.SPA.152-2.T1.bin. Today the router boot itself and the following reason is shown.
Router#sh ver
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.2(2)T1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Wed 29-Feb-12 23:44 by prod_rel_team
ROM: System Bootstrap, Version 15.0(1r)M13, RELEASE SOFTWARE (fc1)
Router uptime is 13 minutes
System returned to ROM by address error at PC 0x898174C, address 0x7C73462E at 15:58:13 CDT Mon Jul 15 2013
System restarted at 17:49:49 CDT Mon Jul 15 2013
System image file is "flash0:c3900-universalk9-mz.SPA.152-2.T1.bin"
Last reload type: Normal Reload
Last reload reason: address error at PC 0x898174C, address 0x7C73462E
Should I change version of IOS????
regards
07-15-2013 04:27 PM
Should I change version of IOS????
Yes.
07-15-2013 04:36 PM
Hi Leo,
I found there is a SOFTWARE ADVISORY NOTICE for this version and for the next version
c3900-universalk9-mz.SPA.152-2.T2.bin, I have to download T4.
regards
07-15-2013 05:40 PM
Router crashes for only two reasons: Hardware or software issues.
So if you get crashes, update the firmware first.
07-15-2013 05:53 PM
Thanks Leo for your recomendation
regards
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide