01-28-2017 11:30 AM - edited 03-08-2019 09:05 AM
ter(config-ext-nacl)#do show running-config
Building configuration...
Current configuration : 2510 bytes
!
! Last configuration change at 18:54:40 UTC Sat Dec 10 2016
!
version 15.0
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot-end-marker
!
!
no aaa new-model
!
no ipv6 cef
ip source-route
ip cef
!
!
!
ip dhcp pool default
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 8.8.8.8 8.8.4.4
lease infinite
!
ip dhcp pool ciro
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
dns-server 8.8.8.8 8.8.4.4
lease infinite
!
ip dhcp pool fabio
network 192.168.3.0 255.255.255.0
default-router 192.168.3.1
dns-server 8.8.8.8 8.8.4.4
lease infinite
!
!
multilink bundle-name authenticated
!
!
!
!
license udi pid CISCO2901/K9 sn FCZ1523C0C1
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
pppoe enable group global
pppoe-client dial-pool-number 1
!
interface GigabitEthernet0/1
description trunk-to-swicth
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/1.1
description default vlan
encapsulation dot1Q 1 native
ip address 192.168.1.1 255.255.255.0
ip access-group 101 in
ip nat inside
ip virtual-reassembly
!
interface GigabitEthernet0/1.2
description ciro vlan
encapsulation dot1Q 2
ip address 192.168.2.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface GigabitEthernet0/1.3
description fabio vlan
encapsulation dot1Q 3
ip address 192.168.3.1 255.255.255.0
ip nat inside
ip virtual-reassembly
!
interface Dialer1
mtu 1492
ip address negotiated
ip nat outside
ip virtual-reassembly
encapsulation ppp
ip tcp adjust-mss 1452
dialer pool 1
ppp pap sent-username aliceadsl password 0 aliceadsl
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
ip nat inside source route-map no_nat interface Dialer1 overload
ip route 0.0.0.0 0.0.0.0 Dialer1
!
access-list 101 permit tcp any host 192.168.1.30 eq 8080
access-list 101 permit tcp host 192.168.1.30 eq 8080 any
access-list 101 permit tcp host 192.168.1.30 eq www any
access-list 101 permit tcp host 192.168.1.30 eq 34599 any
access-list 101 permit tcp any host 192.168.1.30 eq www
access-list 101 permit tcp any host 192.168.1.30 eq 34599
access-list 101 permit ip 192.168.0.0 0.0.255.255 any
!
route-map no_nat permit 1
match ip address 101
!
!
!
control-plane
!
!
line con 0
line aux 0
line vty 0
password ciro
login
line vty 1 4
login
!
scheduler allocate 20000 1000
end
Router(config-ext-nacl)#do show ip interface brief
Interface IP-Address OK? Method Status Protocol
GigabitEthernet0/0 unassigned YES NVRAM up up
GigabitEthernet0/1 unassigned YES NVRAM up up
GigabitEthernet0/1.1 192.168.1.1 YES NVRAM up up
GigabitEthernet0/1.2 192.168.2.1 YES NVRAM up up
GigabitEthernet0/1.3 192.168.3.1 YES NVRAM up up
Dialer1 95.235.55.17 YES IPCP up up
NVI0 192.168.1.1 YES unset up up
Virtual-Access1 unassigned YES unset up up
Virtual-Access2 unassigned YES unset up up
Router(config-ext-nacl)#do show ip route
Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP
D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
E1 - OSPF external type 1, E2 - OSPF external type 2
i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
ia - IS-IS inter area, * - candidate default, U - per-user static route
o - ODR, P - periodic downloaded static route, + - replicated route
Gateway of last resort is 0.0.0.0 to network 0.0.0.0
S* 0.0.0.0/0 is directly connected, Dialer1
95.0.0.0/32 is subnetted, 1 subnets
C 95.235.55.17 is directly connected, Dialer1
192.168.1.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.1.0/24 is directly connected, GigabitEthernet0/1.1
L 192.168.1.1/32 is directly connected, GigabitEthernet0/1.1
192.168.2.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.2.0/24 is directly connected, GigabitEthernet0/1.2
L 192.168.2.1/32 is directly connected, GigabitEthernet0/1.2
192.168.3.0/24 is variably subnetted, 2 subnets, 2 masks
C 192.168.3.0/24 is directly connected, GigabitEthernet0/1.3
L 192.168.3.1/32 is directly connected, GigabitEthernet0/1.3
192.168.100.0/32 is subnetted, 1 subnets
C 192.168.100.1 is directly connected prejudice are Sorrentine ciro I can not open the doors of the 2901 router as I do? aspect your answers thanks.
01-29-2017 12:38 AM
Hi,
What is your question ?
Regards,
Deepak Kumar
01-29-2017 03:46 AM
prejudice are Sorrentine ciro I have a DVR and connected to my system consists of a 2901 router a 2950 switch and I have to make sure that the dvr cameras can see them remotely on mobile succeed dvr door and 34599 and the door 80 with the given configuration with the access-list 101 can not see the cameras on the phone how to do ?? thanks aspect your answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide