I have a router configured with the IP 1.2.51.3 onto g0/0. It does not show the switch when doing show cdp neighbor. I cannot ping gateway, switch or TFTP server. Cables have been replaced. Interface has been brought up. This issue was seen before but was resolved by switching to another port on switch. Have done so, but it has not worked today. Here are the configs for router
Current configuration : 4400 bytes
!
! Last configuration change at 19:00:51 UTC Wed Apr 17 2013
version 15.3
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname sunil_palestrina_stress
!
boot-start-marker
boot-end-marker
!
!
!
no aaa new-model
ip cef
!
!
!
!
!
!
ipv6 multicast rpf use-bgp
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
!
license udi pid VG350-SPE150/K9 sn FOC16104EEH
license boot module vg350 technology-package securityk9
license boot module vg350 technology-package uck9
license boot module vg350 technology-package datak9
hw-module pvdm 0/0
!
hw-module sm 2
!
hw-module sm 4
!
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
no ip address
!
interface GigabitEthernet0/0
ip address 1.2.51.3 255.255.0.0
duplex auto
speed auto
!
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
!
ip forward-protocol nd
!
!
no ip http server
no ip http secure-server
ip route 223.255.254.254 255.255.255.255 1.2.0.1
!
!
!
!
control-plane
!
Switch shows router when I do sh cpd neighbor. Switch can ping gateway 1.2.0.1 and TFTP server but cannot ping router. Here are the configs for switch.
Building configuration...
Current configuration : 1517 bytes
!
version 12.1
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Castellano_Sw
!
!
ip subnet-zero
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
no ip address
!
interface FastEthernet0/2
no ip address
!
interface FastEthernet0/3
no ip address
!
interface FastEthernet0/4
no ip address
!
interface FastEthernet0/5
no ip address
!
interface FastEthernet0/6
no ip address
!
interface FastEthernet0/7
no ip address
!
interface FastEthernet0/8
no ip address
!
interface FastEthernet0/9
no ip address
!
interface FastEthernet0/10
no ip address
!
interface FastEthernet0/11
no ip address
!
interface FastEthernet0/12
no ip address
!
interface FastEthernet0/13
no ip address
!
interface FastEthernet0/14
no ip address
!
interface FastEthernet0/15
no ip address
!
interface FastEthernet0/16
no ip address
!
interface FastEthernet0/17
no ip address
!
interface FastEthernet0/18
no ip address
!
interface FastEthernet0/19
no ip address
!
interface FastEthernet0/20
no ip address
!
interface FastEthernet0/21
no ip address
!
interface FastEthernet0/22
no ip address
!
interface FastEthernet0/23
no ip address
!
interface FastEthernet0/24
no ip address
!
interface FastEthernet0/25
no ip address
!
interface FastEthernet0/26
no ip address
!
interface Vlan1
ip address 1.2.233.233 255.255.0.0
no ip route-cache
!
ip default-gateway 1.2.0.1
ip http server
!
!
line con 0
line vty 0 4
login
line vty 5 15
login
!
end
I am at a loss. Any help will be greatly appreciated. Thanks in advanced!
