cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1530
Views
0
Helpful
5
Replies

router forward a packet through the same interface it received

Hello

is there some way to configure an router to forwarded a packet received on an interface for the same interface automatically, being that in this scenario there are two ISP and NAT configured

5 Replies 5

Reza Sharifi
Hall of Fame
Hall of Fame

balaji.bandi
Hall of Fame
Hall of Fame

we do not see any issue, what is the device you are using, have you done any config and tested ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

there are an VPN service configured, when i try to connect remotelly, the router receives this conection on an interface and forwards the conection for another outbound interface, for this way i cant access the VPN. the conection has to exit for the same interface that was received

in this case we need to look at your config, can you post the config here to look please.

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

Hello


n.gomes@loga.com.br wrote:

there are an VPN service configured, when i try to connect remotelly, the router receives this conection on an interface and forwards the conection for another outbound interface, for this way i cant access the VPN. the conection has to exit for the same interface that was received


Could you try disabling ip redirects on the routers interfaces 

 

 


Please rate and mark as an accepted solution if you have found any of the information provided useful.
This then could assist others on these forums to find a valuable answer and broadens the community’s global network.

Kind Regards
Paul