cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 
cancel
475
Views
0
Helpful
3
Replies

Router on a Stick Help

kristkrist12
Level 1
Level 1

Hello, my name is Chris and  I am new to the discussion forums.  I am having trouble pinging pc-pc with my PKT Tracer configuration.  I have searched the forums and instructional vids but just can't seem to get the pc's to communicate.  Can anyone look at this for me?

1 Accepted Solution

Accepted Solutions

shamax_1983
Level 3
Level 3

Hello Christopher,

Welcome to the forum..

Had a look in to your PKT setup,

You just need to "no shut" the physical interface on the router

Router(config)#interface FastEthernet0/1

Router(config-if)#no shutdown

That's it.. everything else is perfect !!

The  thing that gets you here is that, even if you "no shut" all the sub-interfaces they wouldn't have any effect if the physical interface is still shut down..

PS: once you have enabled the physical interface, your sub-interface level "shut/no shut"s will come in to effect

Please rate this post if helpful

Thanks

Shamal

View solution in original post

3 Replies 3

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

I can't open the attached file. Can you repost it using a different application?

shamax_1983
Level 3
Level 3

Hello Christopher,

Welcome to the forum..

Had a look in to your PKT setup,

You just need to "no shut" the physical interface on the router

Router(config)#interface FastEthernet0/1

Router(config-if)#no shutdown

That's it.. everything else is perfect !!

The  thing that gets you here is that, even if you "no shut" all the sub-interfaces they wouldn't have any effect if the physical interface is still shut down..

PS: once you have enabled the physical interface, your sub-interface level "shut/no shut"s will come in to effect

Please rate this post if helpful

Thanks

Shamal

Perfect!  Thanks a lot!

Review Cisco Networking for a $25 gift card