01-05-2013 06:31 PM - edited 03-07-2019 10:55 AM
Hello, my name is Chris and I am new to the discussion forums. I am having trouble pinging pc-pc with my PKT Tracer configuration. I have searched the forums and instructional vids but just can't seem to get the pc's to communicate. Can anyone look at this for me?
Solved! Go to Solution.
01-05-2013 07:19 PM
Hello Christopher,
Welcome to the forum..
Had a look in to your PKT setup,
You just need to "no shut" the physical interface on the router
Router(config)#interface FastEthernet0/1
Router(config-if)#no shutdown
That's it.. everything else is perfect !!
The thing that gets you here is that, even if you "no shut" all the sub-interfaces they wouldn't have any effect if the physical interface is still shut down..
PS: once you have enabled the physical interface, your sub-interface level "shut/no shut"s will come in to effect
Please rate this post if helpful
Thanks
Shamal
01-05-2013 07:16 PM
Hi,
I can't open the attached file. Can you repost it using a different application?
01-05-2013 07:19 PM
Hello Christopher,
Welcome to the forum..
Had a look in to your PKT setup,
You just need to "no shut" the physical interface on the router
Router(config)#interface FastEthernet0/1
Router(config-if)#no shutdown
That's it.. everything else is perfect !!
The thing that gets you here is that, even if you "no shut" all the sub-interfaces they wouldn't have any effect if the physical interface is still shut down..
PS: once you have enabled the physical interface, your sub-interface level "shut/no shut"s will come in to effect
Please rate this post if helpful
Thanks
Shamal
01-06-2013 05:54 AM
Perfect! Thanks a lot!
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide