Router RIP trouble shoot

[tp067376]

How do i trouble shoot my router rip network? i deleted and configure again but it doesn't work with the network i just assigned.

[tp067376]

I couldnt ping from lan to another lan

[Reza Sharifi]

Use the config guide and go through the config step-by-step.

https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_rip/configuration/15-mt/irr-15-mt-book/irr-cfg-info-prot.html

HTH

[tp067376]

i am still unable to solve the problem by use the config guide. Could you help me check? the password is cisco

[Reza Sharifi]

I am not able to open your attachment. Can you change the format and report?

Also, is this from packet tracer ?

[tp067376]

Could you try this file?

[tp067376]

i am trying to fix with the debug ip rip command 

[Flavio Miranda]

Hi @tp067376 

 I believe you misunderstood the concept of Passive interface

The definition would be:

"Sets the interface as passive, meaning that routing updates will not be sent out this interface. NOTE: For RIP, the passive-inter-face command will prevent the inter-face from sending out routing updates but will allow the interface to receive updates."

You need to remove passive interface command from all routers.

Take a look on the file I am attaching. All PCs can ping each other.

[Kasun Bandara]

hi, remove passive interface from se0/0 in router KB and penang. then remove passive interface  @tp067376 

[Martin L]

RIP should not be on any exam nowdays! not sure why you study it?  anyway, in case of RIP, make sure you run version 2 and no auto-summary command is present for all RIP routers.

Regards, ML
**Please Rate All Helpful Responses **