07-10-2018 12:56 AM - edited 03-08-2019 03:37 PM
Dear All,
please help me with the routing issue. PC2 unable to reach PC1 in the attached pkt file. Thanks in advance.
Regards,
Pravin
Solved! Go to Solution.
07-11-2018 10:43 AM
Hello,
I have reviewed all the simulation, there were many mistakes please review carefull in order to you understand what I changed. If you need to do any question I can help you, right now all the end points of the network can do ping to each other.
Please do not forget to rate useful posts!!!!
Best Regards,
07-13-2018 12:23 PM
Hello,
You forgot to configure the vlans in layer 2, you have to add "vlan 10" and "vlan 20" commands to the layer 3 switch, otherway the interfaces vlans will never go up.
Please do not forget to rate useful answers.
Best Regards,
07-11-2018 08:35 AM - edited 07-11-2018 08:41 AM
Hello! Only to begin,
The cables that you have between the layer 3 switch against the other switches must be crossed, on the other hand the interfaces of the layer 2 switches (switch 1 and switch2) that have against the PCs must be access and the ones aganist the layer 3 switch have to be configured as trunks. I will continue reviewing but please apply this changes.
Please do not forget to rate the useful answers, your calification promote our participation.
Best Regards,
07-11-2018 10:43 AM
Hello,
I have reviewed all the simulation, there were many mistakes please review carefull in order to you understand what I changed. If you need to do any question I can help you, right now all the end points of the network can do ping to each other.
Please do not forget to rate useful posts!!!!
Best Regards,
07-11-2018 06:02 PM
Thanks a lot. Its fine now. Thanks again.
07-11-2018 10:26 PM
07-13-2018 12:23 PM
Hello,
You forgot to configure the vlans in layer 2, you have to add "vlan 10" and "vlan 20" commands to the layer 3 switch, otherway the interfaces vlans will never go up.
Please do not forget to rate useful answers.
Best Regards,
07-15-2018 09:14 PM
Thanks a lot Diana.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide