RX WAHOO: FTCAM PRTY log

[Treemanzhou1]

SLOT 3:Sep 20 05:02:00.846 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:05.686 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:11.569 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:18.137 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:23.681 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:29.949 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:35.789 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:41.065 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

SLOT 3:Sep 20 05:02:47.013 PRC:   RX WAHOO: FTCAM PRTY error dev_id = 0, parity = 10613576, cell_offset = 0x0001F348

Recently a router which has a12000-SIP-601 linecards, I observe the following message continuously wat‘s that log mean？

[acampbell]

Lei,

This link may give you some pointers

http://www.cisco.com/en/US/products/hw/routers/ps167/products_tech_note09186a0080128666.shtml#parity_ecc_errors

Regards,
Alex.
Please rate useful posts.