cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1491
Views
0
Helpful
16
Replies

S720 booting to router

tswank
Level 1
Level 1

Hello,

 

I am currently taking the Cisco Routing and Switching class through NetAcademy. I went out and purchased a used 6500 Cisco with a S720 switch. Unfortunately, it boots to the router, and I am unable to get it to the switch. I believe it's missing the bootflash. If so, how can I fix this issue

16 Replies 16

Reza Sharifi
Hall of Fame
Hall of Fame

Hi,

What is the output of "sh run" when the switch boots?

Also, 6500 is too big and too expensive to use for a lab environment and maintain. All you need is a 3750 to do the labs.

HTH

Building configuration...

Current configuration : 1200 bytes
!
upgrade fpd auto
version 12.2
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
service counters max age 5
!
hostname router-1
!
boot-start-marker
boot-end-marker
!
security passwords min-length 1
enable secret 5 $1$o/DS$oRRMY13BKRl/fiUE.FsyI0
!
no aaa new-model
ip subnet-zero
!
!
!
--More--

mls netflow interface
mls cef error action reset
!
!
diagnostic bootup level minimal
!
!
!
spanning-tree mode pvst
spanning-tree extend system-id
!
redundancy
main-cpu
auto-sync running-config
mode sso
!
vlan internal allocation policy ascending
vlan access-log ratelimit 2000
!
!
!
interface GigabitEthernet6/1
no ip address
--More--


Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASEK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x42240750


*Mar 12 00:04:36.071: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.


Firmware compiled 19-May-09 12:08 by apyu Build [25600]

 


*Mar 12 00:04:33.067: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch

*Mar 12 00:04:36.071: %OIR-SP-6-CONSOLE: Changing console ownership to route processor

 

System Bootstrap, Version 12.2(17r)SX6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 1048576 Kbytes of main memory

TS

Jon Marshall
Hall of Fame
Hall of Fame

 

Not sure what you mean by this. 

 

You know that you configure the L2 and L3 parts using the same CLI ?

 

Jon

Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

Autoboot: failed, BOOT string is empty
Autoboot executing command: "boot "

Initializing ATA monitor library...
string is bootdisk:s72033-ipbasek9-mz.122-33.SXI2a.bin
Loading image, please wait ...

This is the first thing that comes up on the screen.  

Then loads to  router>

Can you post the output of "sh ver" and "sh boot var"

Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASEK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team

ROM: System Bootstrap, Version 12.2(17r)SX6, RELEASE SOFTWARE (fc1)

router-1 uptime is 3 minutes
Uptime for this control processor is 3 minutes
Time since router-1 switched to active is 2 minutes
System returned to ROM by power cycle at 01:51:56 UTC Sat Mar 9 2019 (SP by power on)
System image file is "sup-bootdisk:s72033-ipbasek9-mz.122-33.SXI2a.bin"
Last reload reason: Reload Command

 

 

BOOT variable =
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102

Standby not ready to show bootvar

 

BOOT variable =

your boot variable is empty

set boot variable like this and then test again with "sh boot var"

boot system sup-bootflash:s72033-ipbasek9-mz.122-33.SXI2a.bin

 

 

router-1(config)#$ sup-bootflash:s72033-ipbasek9-mz.122-33.SXI2a.bin
router-1(config)#exit
router-1#
*Mar 13 03:37:43.847: %SYS-5-CONFIG_I: Configured from console by console
router-1#show bootvar
BOOT variable =
CONFIG_FILE variable does not exist
BOOTLDR variable does not exist
Configuration register is 0x2102

Standby not ready to show bootvar

TS

Tim

 

Thanks for what you have provided so far. Can you give us some more information?

- the output of dir sup-bootflash 

- you have provided partial output showing the boot process. Can you reboot and capture and post all of the console output during the boot process?

 

HTH

 

Rick

 

HTH

Rick

Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

Autoboot executing command: "boot bootflash:s72033-ipbasek9-mz.122-33.SXI2a.bin"
Loading image, please wait ...


Initializing ATA monitor library...

Self extracting the image... [OK]
Self decompressing the image : ################################################################################################################################################################################################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

 

Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASEK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x422411C0


*Mar 13 20:44:46.143: %SYS-SP-3-LOGGER_FLUSHING: System pausing to ensure console debugging output.

*Mar 13 20:44:40.331: %VS_PARSE-4-CONFIG_WARNING: Switch bootup in Standalone mode since config register sets to skip Startup config: 0x2142

Firmware compiled 19-May-09 12:08 by apyu Build [25600]

 


*Mar 13 20:44:43.135: %PFREDUN-6-ACTIVE: Initializing as ACTIVE processor for this switch

*Mar 13 20:44:46.143: %OIR-SP-6-CONSOLE: Changing console ownership to route processor

 

System Bootstrap, Version 12.2(17r)SX6, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 2009 by cisco Systems, Inc.
Cat6k-Sup720/RP platform with 1048576 Kbytes of main memory

Download Start
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Download Completed! Booting the image.
Self decompressing the image : ################################################################################################################################################################################################################################################################################################### [OK]

Restricted Rights Legend

Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.

cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706

 

Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASEK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
Image text-base: 0x40101328, data-base: 0x43523DD0


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

cisco WS-C6509-E (R7000) processor (revision 1.5) with 983008K/65536K bytes of memory.
Processor board ID SMG1550N01Y
SR71000 CPU at 600Mhz, Implementation 0x504, Rev 1.2, 512KB L2 Cache
Last reset from s/w reset
1 Virtual Ethernet interface
3 Gigabit Ethernet interfaces
2 Ten Gigabit Ethernet interfaces
1917K bytes of non-volatile configuration memory.
8192K bytes of packet buffer memory.

65536K bytes of Flash internal SIMM (Sector size 512K).

--- System Configuration Dialog ---

Would you like to enter the initial configuration dialog? [yes/no]: n


Press RETURN to get started!


*Mar 13 20:52:06.895: RP: Currently running ROMMON from S (Gold) region
*Mar 13 20:52:07.695: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Mar 13 20:52:28.767: %SYS-5-RESTART: System restarted --
Cisco IOS Software, s72033_rp Software (s72033_rp-IPBASEK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 198
Router>6-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:00 by prod_rel_team
*Mar 13 20:44:46.659: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ensure console debugging output.
*Mar 13 20:51:47.596: SP: IDB is not allocated for unsupported card: slot 1, index 322
*Mar 13 20:52:02.827: %SPANTREE-SP-5-EXTENDED_SYSID: Extended SysId enabled for type vlan. The Bridge IDs of all active STP instances have been updated, which might change the spanning tree topology
*Mar 13 20:52:02.835: SP: SP: Currently running ROMMON from S (Gold) region
*Mar 13 20:52:27.839: %OIR-SP-6-INSPS: Power supply inserted in slot 1
*Mar 13 20:52:27.843: %C6KPWR-SP-4-PSOK: power supply 1 turned on.
*Mar 13 20:52:28.267: %SYS-SP-5-RESTART: System restarted --
Cisco IOS Software, s72033_sp Software (s72033_sp-IPBASEK9-M), Version 12.2(33)SXI2a, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Wed 02-Sep-09 01:25 by prod_rel_team
*Mar 13 20:52:30.495: %C6KPWR-SP-4-UNSUPPORTED: unsupported module in slot 1, power not allowed: Unknown Card Type.
*Mar 13 20:52:34.799: %FABRIC-SP-5-CLEAR_BLOCK: Clear block option is off for the fabric in slot 6.
*Mar 13 20:52:34.799: %FABRIC-SP-5-FABRIC_MODULE_ACTIVE: The Switch Fabric Module in slot 6 became active.
*Mar 13 20:52:37.479: %DIAG-SP-6-RUN_MINIMUM: Module 6: Running Minimal Diagnostics...
Router>
*Mar 13 20:52:50.456: %DIAG-SP-6-DIAG_OK: Module 6: Passed Online Diagnostics
*Mar 13 20:52:52.818: %OIR-SP-6-INSCARD: Card inserted in slot 6, interfaces are now online

 

TS

I set the boot variable, still am unable to access switch.

TS

TS

 

How are you attempting to access the switch? Can you give us a screen shot of your attempt to access the switch and what response you get?

 

I asked for these - can you post these results

- the output of dir sup-bootflash 

- you have provided partial output showing the boot process. Can you reboot and capture and post all of the console output during the boot process?

 

HTH

 

Rick

HTH

Rick
Review Cisco Networking for a $25 gift card