Saf-D Grid Power Cord for 9200CX Switch

[RodL]

We purchased three Catalyst 9200CX-8P-2XGH switches that have Saf-D Grid power connectors built into the power supply. The switches did not come with power cords. I want to be sure to purchase the correct cords that will plug into a standard US 110/120V outlet. Can someone please point me in the right direction to get what is needed to get this powered up? Thank you in advance.

[balaji.bandi]

have you looked the datasheet have part codes :

https://www.cisco.com/c/en/us/products/collateral/switches/catalyst-9200-series-switches/nb-06-cat9200-swit-ser-cte-en.html

Also check installation guide :

https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9200/hardware/install/b-c9200cx-hig/Installing-a-compact-switch.html

[RodL]

Yes, I have. Interestingly, these show a standard power connection, not the Saf-D Grid type. I have no idea why these particular switches shipped with this peculiar plug design. 

[Flavio Miranda · Accepted solution]

@RodL 

For HVDC (Saf-D Grid) use these options: 

• CAB-AC-20A-SG-US—power cord, 110 VAC 20A, Straight Blade, NEMA 5-20P/Saf-D-Grid, North
America
• CAB-AC-20A-SG-US1—power cord, 125 VAC 20A, twist lock, NEMA L5-20/Saf-D-Grid, North
America
• CAB-AC-20A-SG-US2—power cord, 250 VAC 20A, straight-blade, NEMA 6-20/Saf-D-Grid, North
America
• CAB-AC-20A-SG-US3—power cord, 250 VAC 20A, twist lock, NEMA L6-20/Saf-D-Grid, North
America
• CAB-AC-20A-SG-US4—power cord, 277 VAC 20A, NEMA L7-20P/Saf-D-Grid, North America
• CAB-AC-20A-SG-C20—cabinet jumper power cord, 250 VAC, 20A, IEC C20/Saf-D-Grid, North

[RodL]

Thank you @Flavio Miranda