cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
271
Views
0
Helpful
1
Replies

SBS SLM2024PT-AU switch port issues

S N
Level 1
Level 1

Hello,

 

Recently I bought Small business switch SLM2024PT-AU and when I connect all the ports to the switch and the devices like my laptop , printer etc to my network points, only one port is recognizing 1 GB and all other ports are showing as 100MBps.

If I connect my laptop directly to the switch it is showing as 1 GB ( on all the ports).

Let me know if any configuration needs to be done on switch and any other options to be check.

Thanks

Sathya

 

1 Reply 1

Mark Malone
VIP Alumni
VIP Alumni

Not familiar with this model but the sg200 which i would say is generally close you can edit port settings, you should be able to set the port to speed 1000 / duplex full try hardcode it see if it makes a difference, on the sg you can also tell it to only negotiate to 100 so make sure its not the same on this switch and its set wrong