10-19-2016 11:40 PM - edited 03-08-2019 07:51 AM
i recently connected a sfp between my 3560 switch and my 6500 core switch , my 3560 logs showed this " %PHY-4-SFP_NOT_SUPPORTED: The SFP in Gi0/27 is not supported" what does this mean? is the sfp model itself not supported by the switch or there is a incompatibility issue between the two sfp? i have been told that both sfp need to be either SR"shor range" or LR"long range " but i cant see it written on the sfp ? both models have the following writing on them:
on the 3560 (DS-SFP-FC4G-SW)
on the 6500 (1000BASE-SX)
any ideas?
Solved! Go to Solution.
10-20-2016 12:16 AM
I don't see this as a supported sfp on the 3560 ? the SX is supported on 6500
DS-SFP-FC4G-SW is for an MDS switch
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc462044410
Catalyst 3560 series |
|||
Network Device |
Transceiver Model |
Minimum Software Release Required |
|
DOM Support |
Software Release |
||
WS-C3560-24PS |
GLC-T (10/100/1000) |
— |
12.1(19)EA1c |
GLC-SX-MMD |
12.2(46)SE |
12.1(19)EA1c |
|
GLC-BX-D |
12.2(46)SE |
12.2(25)SEB |
|
DWDM SFP |
12.2(46)SE |
12.2(40)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
WS-C3560G-24TS |
GLC-T (10/100/1000) |
— |
12.2(20)SE3 |
GLC-SX-MMD |
12.2(46)SE |
12.2(20)SE3 |
|
GLC-BX-D |
12.2(46)SE |
12.2(25)SEB |
|
DWDM SFP |
12.2(46)SE |
12.2(40)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
WS-C3560-48TS |
GLC-T (10/100/1000) |
— |
12.2(20)SE3 |
GLC-SX-MMD |
12.2(46)SE |
12.2(20)SE3 |
|
GLC-BX-D |
12.2(46)SE |
12.2(25)SEB |
|
DWDM SFP |
12.2(46)SE |
12.2(40)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
WS-C3560-8PC |
GLC-T (10/100/1000) |
— |
12.2(35)SE |
GLC-ZX-SM |
12.2(46)SE |
12.2(35)SE |
|
WS-C3560-12PC-S |
GLC-SX-MM |
— |
12.2(46)SE |
GLC-ZX-SM |
12.2(46)SE |
12.2(46)SE |
|
WS-C3560V2-24PS |
GLC-T (10/100/1000) |
— |
12.2(50)SE |
GLC-SX-MMD |
12.2(50)SE |
12.2(50)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
GLC-EX-SMD1 |
12.2(58)SE |
12.2(58)SE |
10-20-2016 12:16 AM
I don't see this as a supported sfp on the 3560 ? the SX is supported on 6500
DS-SFP-FC4G-SW is for an MDS switch
http://www.cisco.com/c/en/us/td/docs/interfaces_modules/transceiver_modules/compatibility/matrix/GE_Tx_Matrix.html#_Toc462044410
Catalyst 3560 series |
|||
Network Device |
Transceiver Model |
Minimum Software Release Required |
|
DOM Support |
Software Release |
||
WS-C3560-24PS |
GLC-T (10/100/1000) |
— |
12.1(19)EA1c |
GLC-SX-MMD |
12.2(46)SE |
12.1(19)EA1c |
|
GLC-BX-D |
12.2(46)SE |
12.2(25)SEB |
|
DWDM SFP |
12.2(46)SE |
12.2(40)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
WS-C3560G-24TS |
GLC-T (10/100/1000) |
— |
12.2(20)SE3 |
GLC-SX-MMD |
12.2(46)SE |
12.2(20)SE3 |
|
GLC-BX-D |
12.2(46)SE |
12.2(25)SEB |
|
DWDM SFP |
12.2(46)SE |
12.2(40)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
WS-C3560-48TS |
GLC-T (10/100/1000) |
— |
12.2(20)SE3 |
GLC-SX-MMD |
12.2(46)SE |
12.2(20)SE3 |
|
GLC-BX-D |
12.2(46)SE |
12.2(25)SEB |
|
DWDM SFP |
12.2(46)SE |
12.2(40)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
WS-C3560-8PC |
GLC-T (10/100/1000) |
— |
12.2(35)SE |
GLC-ZX-SM |
12.2(46)SE |
12.2(35)SE |
|
WS-C3560-12PC-S |
GLC-SX-MM |
— |
12.2(46)SE |
GLC-ZX-SM |
12.2(46)SE |
12.2(46)SE |
|
WS-C3560V2-24PS |
GLC-T (10/100/1000) |
— |
12.2(50)SE |
GLC-SX-MMD |
12.2(50)SE |
12.2(50)SE |
|
DWDM SFP (add.) |
12.2(52)SE |
12.2(52)SE |
|
GLC-EX-SMD1 |
12.2(58)SE |
12.2(58)SE |
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide