SFP+ Twinax vs SFP+ Active optical

[Anwar Safian]

Hi Expert

I would like to know what is the difference and use case between SFP+ Twinax and SFP+ Active optical?

Example SFP-H10GB-CU1M and SFP-10G-AOC1M.

What I know is only it is copper and fiber cable, and the copper price is cheaper. 

Any difference and use case, example performance etc between these two cables?

[balaji.bandi]

There is no difference in terms of use case, but distance is a limitation for Ethernet over fiber cable. Twinax may be an available maximum distance of 10M. this is mostly used in UCS and DC envrionment.

[Reza Sharifi]

Hi,

They both provide the same functionality but SFP-H10GB-CU1M uses copper and SFP-10G-AOC1M uses multimode fiber and that is why SFP-10G-AOC1M is more expensive.

here is more info"

https://community.fs.com/blog/guide-to-10g-dac-and-aoc-cables.html

HTH

[Anwar Safian]

Hi all

If there is no difference, why cisco is selling the SFP+ Active optical that is more expensive?

If the requirement is only 1 meter, all people in the world are going to choose Twinax which is cheaper. 

[balaji.bandi]

Sure it all depends on the requirement and use case, you can not re-purpose those cases compare to SFP.

[adeebtaqui]

Fiber is preferred when copper cable arrangement will be difficult and 

[Jitendra Kumar]

you should check this document..

https://www.cables-solutions.com/10g-twinax-vs-fiber.html