07-29-2021 01:53 PM - edited 07-29-2021 02:17 PM
hi all. First time poster here...
I'm having a hard time setting up my homelab. this is what I want to achieve :
I have googled, looked at youtube videos for the last several days and can not for the life of me get the setup to work. I am 100% certain that it is my lacking knowledge that makes me overlook something, but I'm in desperate need for some assistance. See attached screenshot for how I have set it up right now.
If I connect two PC's in port 13 and 14 on the SG200 they can ping each other. If I connect port GE8 on the 250 to port 50 on the SG200, and one PC in port 4 on the SG250 the ping dies.
Screenshots from the SG250 and from the SG200-50 are attached.
Thanks in advance
peram
Solved! Go to Solution.
07-30-2021 06:03 AM
Hi again. Sort of embarrassing solution to my problem. It helps to connect the trunk ports together.
Sorry for the noise
peram
07-30-2021 06:03 AM
Hi again. Sort of embarrassing solution to my problem. It helps to connect the trunk ports together.
Sorry for the noise
peram
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide