SG500X

[peteryouhannafawzy]

Can i user all the uplink and the stacking ports when i convert the switch from stacking mode to standalone switch ? , that mean i will have 4 SFP+ ports all of them working as uplink

[Hitesh Vinzoda · Accepted solution]

Dude,

If you use the switch is standalone mode all the ports are available as standard ports and can be used as an uplink

Non-Stacking standalone option: • Ports XG3/S1 and XG4/S2 available as standard network ports – Speed—1G or 10G • Port S1, S2 and 5G are not available • Ports XG1 and XG2 are available as standard network ports – Speed—1G or 10G

HTH

Hitesh

pls rate useful posts.

[peteryouhannafawzy]

Thanks alot but,

what if i will use the switch with the stack ports what options can i get ?

[vaib7av.shirkul · Accepted solution]

Hi,

These are the uplink options for Cisco 500 series#

Stacking Option One (default option):
• Ports XG3/S1 and XG4/S2 are configured as stack ports
– Speed—1G, 10G, 1G/10G-auto
– 5G is not available
• Ports XG1 and XG2 are available as standard network ports
– Speed—1G or 10G

Stacking Option Two:
• Ports XG3/S1 and XG4/S2 are not available
• Port S1, S2 and 5G are configured as stack ports
– Speed—1G, 5G, 1G/5G-auto
• Ports XG1 and XG2 are available as standard network ports
– Speed—1G or 10G

Non-Stacking standalone option:
• Ports XG3/S1 and XG4/S2 available as standard network ports
– Speed—1G or 10G
• Port S1, S2 and 5G are not available
• Ports XG1 and XG2 are available as standard network ports
– Speed—1G or 10G
 

- HTH

[peteryouhannafawzy]

Thanks alot for your support