03-24-2022 10:08 AM
Hello Guys,
It would be really appriciated if you could helo me ti find OIDs to check memory status of switch SG550X-24.
I have tried all of Catalyst OIDs but non of them worked.
Kind Regards,
03-24-2022 10:43 AM
These are small business switches, may be limited available (what you looking to get like cat switches)
try snmpwalk with OID 1.3.6.1.4.1.9.6.1.82.24.2 ( what ever you get output that is limited)
also get MIB file from download :
https://software.cisco.com/download/home/286305669/type/283415684/release/2.5.7.85
03-24-2022 11:10 AM
Hello Balaji,
Thanks for ur comment but unfortunately it dose not work :(.
Kind Regards,
03-25-2022 03:47 AM
as i said it has limited - what you get outcome when you snmpwalk against device ?
03-25-2022 04:18 AM
This is the outcome of Snmpwalk:
snmpwalk -v2c -c xxxxx xx.xx.xx.xx 1.3.6.1.4.1.9.6.1.82.24.2
iso.3.6.1.4.1.9.6.1.82.24.2 = No Such Object available on this agent at this OID
03-25-2022 04:40 AM
how about this :
snmpwalk -v2c -c xxxxx xx.xx.xx.xx
03-25-2022 05:44 AM
There is no problem by SNMP:
snmpwalk -v2c -c xxxxxx xx.xx.xx.xx1.3.6.1.4.1.9.6.1
iso.3.6.1.4.1.9.6.1.101.1.1.0 = INTEGER: 65535
iso.3.6.1.4.1.9.6.1.101.1.2.0 = INTEGER: 26
iso.3.6.1.4.1.9.6.1.101.1.4.0 = Hex-STRING: E0
iso.3.6.1.4.1.9.6.1.101.1.5.0 = INTEGER: 1
iso.3.6.1.4.1.9.6.1.101.1.6.0 = INTEGER: 1
iso.3.6.1.4.1.9.6.1.101.1.7.0 = INTEGER: 3
iso.3.6.1.4.1.9.6.1.101.1.8.0 = INTEGER: 4
iso.3.6.1.4.1.9.6.1.101.1.9.0 = INTEGER: 4
iso.3.6.1.4.1.9.6.1.101.1.10.0 = Timeticks: (4294967295) 497 days, 2:27:52.95
iso.3.6.1.4.1.9.6.1.101.1.12.0 = OID: iso.3.6.1.4.1.9.6.1.101
iso.3.6.1.4.1.9.6.1.101.1.13.0 = INTEGER: 1
iso.3.6.1.4.1.9.6.1.101.1.14.0 = ""
iso.3.6.1.4.1.9.6.1.101.1.15.0 = ""
iso.3.6.1.4.1.9.6.1.101.1.16.0 = ""
iso.3.6.1.4.1.9.6.1.101.1.17.0 = ""
iso.3.6.1.4.1.9.6.1.101.1.18.0 = INTEGER: 2
iso.3.6.1.4.1.9.6.1.101.1.19.1.3.3.1 = STRING: "SG-550X-24"
iso.3.6.1.4.1.9.6.1.101.1.19.1.4.3.1 = INTEGER: 1
iso.3.6.1.4.1.9.6.1.101.1.20.0 = INTEGER: 1
iso.3.6.1.4.1.9.6.1.101.2.4.0 = STRING: "2.5.5.47"
03-25-2022 06:04 AM
Just suggested (not that SNMP not working), so you get all OID information.
if you do not see them using standard SNMP, then you wont be able to get that information.
download MIB file from site and using that MIB and test SNMP walk.
03-25-2022 06:48 AM
I did but there was no success
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide