SG550X-24-stacking -> potential free physical output for alarming

[beli]

The customer would like to set up the fibre optic connection interruption via their control system as an alarm.

Does the switch SG550X-24 have an output where we could use this?

So a potential-free one.

Refernz to the last SR 692318458 (Valentin Dimitrov)

[Flavio Miranda]

Hi

 The options to interconnect or connect to this switch model are:

SG550X-24	SG550X-24-K9-xx	●  24 x 10/100/1000 ports ●  4 x 10 Gigabit Ethernet (2 x 10GBase-T/SFP+ combo + 2 x SFP+)
SG550X-24P	SG550X-24P-K9-xx	●  24 x 10/100/1000 PoE+ ports with 195W power budget ●  4 x 10 Gigabit Ethernet (2 x 10GBase-T/SFP+ combo + 2 x SFP+)
SG550X-24MP	SG550X-24MP-K9-xx	●  24 x 10/100/1000 PoE+ ports with 382W power budget ●  4 x 10 Gigabit Ethernet (2 x 10GBase-T/SFP+ combo + 2 x SFP+)
SG550X-24MPP	SG550X-24MPP-K9-xx	●  24 x 10/100/1000 PoE+ ports with 740W power budget ●  4 x 10 Gigabit Ethernet (2 x 10GBase-T/SFP+ combo + 2 x SFP+)

So, if this Alarm system support cable or fiber and support Ethernet protocol, you are good to go.