12-20-2020 11:50 PM - edited 12-21-2020 03:14 AM
Hello,
Is MLAGG/ mLACP / LACP accross STACK is avaliable on SG550XG-24F-K9 ?
Can i use for LAGG add ports from second/ third chassis?
Solved! Go to Solution.
12-21-2020 02:55 AM
12-21-2020 02:54 AM
No ,this feature does not run on small business switches :
>...
You can run the mLACP commands on all Cisco IOS and Cisco IOS XR devices that support pseudowire technology, such as
Cisco 7600 series devices
Cisco 6509 NEB-A series devices
Cisco ASR 9000 series routers.
12-21-2020 02:55 AM
yes it can
12-21-2020 03:10 AM
- Note that original post refers to mLACP support being questioned not simple LACP
M.
12-21-2020 03:15 AM
Sorry, im edit my post. I need to bu second switch and im wondering if i can add ports from second chassis.
12-21-2020 03:30 AM
- Ok, to clarify the thread , you can indeed do LACP on single device . mlacp (multi chassis) is not supported on this platform, see my original reply
M.
12-21-2020 03:33 AM
@marce1000
i reffered to the section that says: cross-stack QoS, VLANs, LAGs,
is this an error in the datasheet?
12-21-2020 03:37 AM
- No , but note the difference between lacp and multi-chassis LACP
M.
12-21-2020 03:42 AM
can you describe differences and reply to my question (can i create LAG (LACP) over 2 chassis in stack / TWO SG550XG-24F)?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide