05-19-2019 10:52 PM
I have SG 300-28 in my network. want to know all devices' ip addresses or mac addresses connected to my switch. is this possible to see from web browser? or only from command line? what are the commands then?
Solved! Go to Solution.
05-20-2019 11:32 PM
Hi there,
Yes, on the column on the left of the webGUI there should be an entry titlled 'MAC Address Tables'. Also further down under 'IP Configuration' is a link for 'ARP'.
cheers,
Seb.
05-19-2019 11:33 PM
Hi there,
On the CLI the commands are:
sh mac address-table
sh arp
Keep in mind you will only see ARP entries belonging to subnets for which the SG300 has VLAN interfaces (SVIs) configured.
cheers,
Seb.
05-20-2019 09:53 PM
As you know SG 300 has web interface, can I see mac addresses from there?
05-20-2019 11:32 PM
Hi there,
Yes, on the column on the left of the webGUI there should be an entry titlled 'MAC Address Tables'. Also further down under 'IP Configuration' is a link for 'ARP'.
cheers,
Seb.
05-23-2019 02:04 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide