03-07-2019 01:48 PM
I am studying for the CCNA exam from the "CCENT/CCNA ICND1 100-105 Official Certification Guide".
I am on the 156 page, Demonstrating Mac Learning.
I wrote show mac address-table in the Switch CLI but i didnt seem something.
Solved! Go to Solution.
03-07-2019 01:57 PM - edited 03-07-2019 02:03 PM
Hi @bade11 ,
The switch learns MAC addresses when it receives traffic on its ports.
If no traffic has yet occurred, the MAC table will be empty, like the image you show.
I suggest simulating traffic(for example through a ping or a DHCP request) from the final devices connected to that switch and rechecking.
Remember to mark the correct answers as solved, because that helps other users with similar doubts.
Regards
03-07-2019 01:57 PM - edited 03-07-2019 02:03 PM
Hi @bade11 ,
The switch learns MAC addresses when it receives traffic on its ports.
If no traffic has yet occurred, the MAC table will be empty, like the image you show.
I suggest simulating traffic(for example through a ping or a DHCP request) from the final devices connected to that switch and rechecking.
Remember to mark the correct answers as solved, because that helps other users with similar doubts.
Regards
03-07-2019 02:28 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide