03-30-2023 02:55 AM
kindly i have Nexus 9000 series and when I issue this command it doesn't work on the 9000 series
show platform software ethpc event-history interface
Does anyone know if there is any similar command to it on Nexus 9000 ??
03-30-2023 03:01 AM
try
switch# show system internal ethpm event-history interface ethernet
03-30-2023 05:58 AM
this command (switch# show system internal ethpm event-history interface ethernet) works on Nexus 9000 but doesn't give me the output I am looking for I need a command that gives me an output similar to this one :
'show platform software ethpc event-history interface e1/36'<snip> 33) Event IF_PCFG_CMD, len: 8, at 444263 usecs after Sat Oct 21 05:47:47 2017 Processed port command PORT_CMD_DISABLE(3) status 0 34) Event IF_LINK_ST, len: 34, at 436138 usecs after Sat Oct 21 05:47:47 2017 Link down sent to 0xfe000000 - Failure, Reason: Link down debounce timer stopped and link is down 35) Event IF_LINK_ST, len: 34, at 435893 usecs after Sat Oct 21 05:47:47 2017 Link down sent to 0xfe000000 - Failure, Reason: Link down debounce timer started 36) Event IF_LINK_ST, len: 34, at 268110 usecs after Sat Oct 21 04:51:22 2017 Link up sent to 0xfe000000 - Success, Reason: SUCCESS, Speed: 10000, Mdix mode: 3, Flow control mode: 0, Port duplex: 2 <snip...another example...> 59) Event IF_LINK_ST, len: 34, at 554438 usecs after Sat Oct 21 04:50:12 2017 Link down sent to 0xfe000000 - Failure, Reason: Link down debounce timer stopped and link is down 60) Event IF_LINK_ST, len: 34, at 552828 usecs after Sat Oct 21 04:50:12 2017 Link down sent to 0xfe000000 - Failure, Reason: Link down debounce timer started 61) Event IF_LINK_ST, len: 34, at 916406 usecs after Sat Oct 21 04:45:54 2017 Link up sent to 0xfe000000 - Success, Reason: SUCCESS, Speed: 10000, Mdix mode: 3, Flow control mode: 0, Port duplex: 2
03-30-2023 06:56 AM
04-04-2023 12:53 AM
thank you but its not the output I am looking for, these are two different commands with different outputs I am interested in the first one
show platform software ethpc event-history interface e1/36 show system internal ethpm event-history interface e1/36
08-06-2024 07:09 AM
As per TAC
The best command to retrieve debounce information specifically is `attach mod x` followed by `show system internal port-client link-event`. It’s module-wide instead of interface specific, there is no direct equivalent to the ethpc commands on N9K.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide