Re: show ver for a specific module of a 3850 stack

marcocanova74 · ‎12-18-2017

Good morning,

i wiuld like to run a "show ver" command on a specific module of a 3850 stack. Basically I need to understand the reload reason.

On 3750 I simply opened a session on the module and run "show ver"; unfortunately on 3850 the situation is changed, I can't run this command:

SwMag-1000-CRoom-2(diag)#show

ap Cisco access point information

avc Show AVC Information

buffers Buffer pool statistics

checkpoint Checkpoint Facility (CF) and halib

exception Exception handling information

ffm Properties of a single Forwarding and Feature Manager instance

guest-lan Show Guest WLAN Configuraton

iif Interface ID Factory info

l2tp Show active L2TP sessions

license Display licenses.

logging Show the contents of the logging buffer

mgmt-infra Management infra

onboard no description

oscore core-os information

package Show posix clients compatibility

pds Show PDS information

processes Active process statistics

rom-monitor Show ROMMON version information

romvar Romvar information

sdm SDM

software no description

tech-support Show tech support commands

voltage Voltage Margins

wireless Show wireless specific configuration

wlan Show WLAN Configuraton

The crash info is not meaningful:

SwMag-1000-CRoom-2#dir crashinfo-7:

Directory of crashinfo-7:/

11 -rw- 0 Jan 1 1970 01:00:06 +01:00 koops.dat

12 -rw- 0 Dec 16 2017 16:53:04 +01:00 cilogs

Thank you for your help

Best regards

Marco Canova

Maksim Urmanov · ‎12-18-2017

Hello, each stack member should have its own crash folder. it depends on amount of members in your installation.

Try to find crashlog info using following command:

dir crashinfo-1:

Add required member number by yourself

marcocanova74 · ‎12-18-2017

Hi Maksim, I already performed the command for the switch I need to have the information (the #7)

Leo Laohoo · ‎12-18-2017

Post the complete output to the command "sh version".

marcocanova74 · ‎12-18-2017

Here, below the output but note I need to undersatnd why the member #7 rebooted.

thank you
mc

SwMag-1000-CRoom-2#sh ver
Cisco IOS Software, IOS-XE Software, Catalyst L3 Switch Software (CAT3K_CAA-UNIVERSALK9-M), Version 03.06.03E RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2015 by Cisco Systems, Inc.
Compiled Wed 26-Aug-15 11:22 by prod_rel_team

Cisco IOS-XE software, Copyright (c) 2005-2015 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0.
(http://www.gnu.org/licenses/gpl-2.0.html) For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.

ROM: IOS-XE ROMMON
BOOTLDR: CAT3K_CAA Boot Loader (CAT3K_CAA-HBOOT-M) Version 3.58, RELEASE SOFTWARE (P)

SwMag-1000-CRoom-2 uptime is 4 weeks, 4 hours, 26 minutes
Uptime for this control processor is 4 weeks, 4 hours, 32 minutes
System returned to ROM by Power Failure
System restarted at 07:02:35 GMT Mon Nov 20 2017
System image file is "flash:packages.conf"
Last reload reason: Power Failure

This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

License Level: Ipbase
License Type: Permanent
Next reload license Level: Ipbase

cisco WS-C3850-48P (MIPS) processor with 4194304K bytes of physical memory.
Processor board ID FCW2029D1JZ
2 Virtual Ethernet interfaces
364 Gigabit Ethernet interfaces
28 Ten Gigabit Ethernet interfaces
2048K bytes of non-volatile configuration memory.
4194304K bytes of physical memory.
252000K bytes of Crash Files at crashinfo:.
252000K bytes of Crash Files at crashinfo-1:.
252000K bytes of Crash Files at crashinfo-2:.
252000K bytes of Crash Files at crashinfo-3:.
252000K bytes of Crash Files at crashinfo-4:.
252000K bytes of Crash Files at crashinfo-6:.
252000K bytes of Crash Files at crashinfo-7:.
1611414K bytes of Flash at flash:.
1611414K bytes of Flash at flash-1:.
1611414K bytes of Flash at flash-2:.
1611414K bytes of Flash at flash-3:.
1611414K bytes of Flash at flash-4:.
1611414K bytes of Flash at flash-6:.
1611414K bytes of Flash at flash-7:.
0K bytes of Dummy USB Flash at usbflash0:.
0K bytes of Dummy USB Flash at usbflash0-1:.
0K bytes of Dummy USB Flash at usbflash0-2:.
0K bytes of Dummy USB Flash at usbflash0-3:.
0K bytes of Dummy USB Flash at usbflash0-4:.
0K bytes of Dummy USB Flash at usbflash0-6:.
0K bytes of Dummy USB Flash at usbflash0-7:.
0K bytes of at webui:.

Base Ethernet MAC Address : d4:2c:44:a6:af:80
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC20288B5M
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FCW2029D1JZ

Switch Ports Model SW Version SW Image Mode
------ ----- ----- ---------- ---------- ----
1 56 WS-C3850-48P 03.06.03E cat3k_caa-universalk9 INSTALL
2 56 WS-C3850-48P 03.06.03E cat3k_caa-universalk9 INSTALL
3 56 WS-C3850-48P 03.06.03E cat3k_caa-universalk9 INSTALL
4 56 WS-C3850-48P 03.06.03E cat3k_caa-universalk9 INSTALL
* 5 56 WS-C3850-48P 03.06.03E cat3k_caa-universalk9 INSTALL
6 56 WS-C3850-48P 03.06.03E cat3k_caa-universalk9 INSTALL
7 56 WS-C3850-48P 03.06.03E cat3k_caa-universalk9 INSTALL

Switch 01
---------
Switch uptime : 4 weeks, 4 hours, 32 minutes
Base Ethernet MAC Address : d4:2c:44:a6:b0:00
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC20288BVT
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FOC2029U21G

Switch 02
---------
Switch uptime : 4 weeks, 4 hours, 32 minutes
Base Ethernet MAC Address : 00:87:31:0a:f3:80
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC2029A65J
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FCW2029C207

Switch 03
---------
Switch uptime : 4 weeks, 4 hours, 32 minutes
Base Ethernet MAC Address : 00:a2:89:ad:d5:00
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC2028675L
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FCW2029F12C

Switch 04
---------
Switch uptime : 4 weeks, 4 hours, 32 minutes
Base Ethernet MAC Address : 00:87:31:0a:df:00
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC202868GY
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FCW2029F1S5

Switch 06
---------
Switch uptime : 4 weeks, 4 hours, 33 minutes
Base Ethernet MAC Address : 00:87:31:0a:e2:00
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC202866Y5
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FOC2029X1Q0

Switch 07
---------
Switch uptime : 1 day, 18 hours, 36 minutes
Base Ethernet MAC Address : d4:2c:44:b4:0a:00
Motherboard Assembly Number : 73-15800-08
Motherboard Serial Number : FOC20288C99
Model Revision Number : AB0
Motherboard Revision Number : A0
Model Number : WS-C3850-48P
System Serial Number : FCW2029C15C

Configuration register is 0x102