cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1942
Views
0
Helpful
9
Replies

Smart Install Connectivity

Jure Knez
Level 1
Level 1

I'm trying to install Cisco 3560CG switch using Smart InstalI based on Connectivity. 3560CG is connected to Cisco 4500x (IOS 03.06.00.E.152-2.E) in port 15.

Here is the configuration:

4500x:

interface Vlan1
 ip address 192.168.1.1 255.255.255.0

vstack vlan 1
!
vstack director 192.168.1.1
vstack basic
vstack startup-vlan 1

!

vstack group custom test connectivity

match host 192.168.1.1 interface TenGigabitEthernet1/15

!

This configuration is not working. I'm receiving this logs:

%SMI-6-INCORRECT_CFG: No image and config configured for this sku type WS-C3560CG-8TC-S

Any idea?

 

Debug on 4500x:

4500x#
Jan 26 09:36:58.040: %LINK-3-UPDOWN: Interface TenGigabitEthernet1/15, changed state to up
Jan 26 09:37:00.040: %LINEPROTO-5-UPDOWN: Line protocol on Interface TenGigabitEthernet1/15, changed state to up
Jan 26 09:37:01.630: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:01.630: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:01.630: VSTACK:
 received vlan_plus_seqno=1, seq no for vlan = 0,prev_seq_no=65381 port_mode =0
Jan 26 09:37:01.630: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:01.630: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:01.630: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:01.630: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:01.630: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:01.630: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:01.631: VSTACK_DIR_DB: smi_cdp_process:In process calling Handler for MSG typ 0
Jan 26 09:37:01.631: VSTACK_DIR_DB: smi_handle_cdp_event: ADD NEIGH EVENT
Jan 26 09:37:01.631: VSTACK_DIR_DB:
smi_handle_cdp_event: Switch(ccd5.390f.be80) replace type=Same Switch
Jan 26 09:37:01.631: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:37:01.631: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry is called.
Jan 26 09:37:01.631: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry: Switch is not active or invalid RED MODE!
Jan 26 09:37:01.631: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:37:01.631: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:01.631: VSTACK_DIR_DB: Match Found
Jan 26 09:37:01.631: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:37:01.631: VSTACK_DIR_DB: Ports : local GigabitEthernet0/10, out port TenGigabitEthernet1/15
Jan 26 09:37:01.631: VSTACK_DIR_DB: Match Found
Jan 26 09:37:01.631: VSTACK_PROTOCOL:
smi_check_init_disc_send_again: ibc ip zero, mac not present in queue, so enqueued ccd5.390f.be80 in the queue
Jan 26 09:37:02.061: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:02.061: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:02.061: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:02.061: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:02.061: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:02.061: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:02.061: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:02.061: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:02.061: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:02.061: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:02.061: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:03.067: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:03.067: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:03.067: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:03.067: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:03.067: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:03.067: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:03.067: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:03.067: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:03.067: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:03.067: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:03.067: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:04.068: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:04.068: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:04.068: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:04.068: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:04.068: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:04.068: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:04.068: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:04.068: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:04.068: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:04.068: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:04.069: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:05.069: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:05.069: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:05.069: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:05.069: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:05.069: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:05.070: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:05.070: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:05.070: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:05.070: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:05.070: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:05.070: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:06.070: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:06.071: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:06.071: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:06.071: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:06.071: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:06.071: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:06.071: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:06.071: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:06.071: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:06.071: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:06.071: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:07.067: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:07.068: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:07.068: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:07.068: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:07.068: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:07.068: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:07.068: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:07.068: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:07.068: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:07.068: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:07.068: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:08.069: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:08.069: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:08.069: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:08.069: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:08.069: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:08.070: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:08.070: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:08.070: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:08.070: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:08.070: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:08.070: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:09.070: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:09.070: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:09.070: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:09.071: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:09.071: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:09.071: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:09.071: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:09.071: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:09.071: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:09.071: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:09.071: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:10.072: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:10.072: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:10.072: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:10.072: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:10.072: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:10.072: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:10.072: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 0.0.0.0,
           host_name : Switch, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:10.072: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:10.072: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:10.072: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:37:10.072: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:37:31.041: %LINK-3-UPDOWN: Interface Vlan1, changed state to up
Jan 26 09:37:31.041: %LINK-3-UPDOWN: Interface Vlan90, changed state to up
Jan 26 09:37:32.041: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up
Jan 26 09:37:32.041: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan90, changed state to up
Jan 26 09:37:34.867: VSTACK_PROTOCOL:
smi_insert_dhcp_options: Inside DHCP options
Jan 26 09:37:34.867: VSTACK_PROTOCOL:
smi_dhcp_shim_interesting_offer:No vstack options inserted, packet
                        may be flooded,
 out_vlan_id is 0
Jan 26 09:37:34.867: VSTACK_PROTOCOL:
smi_insert_dhcp_options: Inside DHCP options
Jan 26 09:37:34.867: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:37:34.867: VSTACK_GROUP:
smi_get_img_cfg_from_mac: Input Mac address is: ccd5.390f.be80
Jan 26 09:37:34.867: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: Entry mac for connectivity ccd5.390f.be80
Jan 26 09:37:34.867: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: input port and ip TenGigabitEthernet1/15 192.168.1.1
Jan 26 09:37:34.867: VSTACK_GROUP:
smi_get_img_cfg_from_conn: Input address is: 192.168.1.1
Jan 26 09:37:34.867: VSTACK_GROUP:
 and interface is: TenGigabitEthernet1/15
Jan 26 09:37:34.867: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input ip:192.168.1.1, list ip 192.168.1.1
Jan 26 09:37:34.867: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input port TenGigabitEthernet1/15, list port TenGigabitEthernet1/15
Jan 26 09:37:34.868: VSTACK_GROUP:
smi_get_img_cfg_from_conn: error return:
Jan 26 09:37:34.868: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Input Sku-id is: WS-C3560CG-8TC-S
Jan 26 09:37:34.868: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Group is: test
Jan 26 09:37:34.868: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: error return
Jan 26 09:37:34.868: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku is WS-C3560CG-8TC-S

Jan 26 09:37:34.868: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku No 165

Jan 26 09:37:34.868: VSTACK_GROUP:
!!smi_get_group_info: Failed to get the CFG or IMG
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_ibd_get_image_config_name_from_chaddr: Did not match any group, the default group is also not configured
Jan 26 09:37:34.868: %SMI-6-INCORRECT_CFG: No image and config configured for this sku type WS-C3560CG-8TC-S
Jan 26 09:37:34.868: VSTACK_DOWNLOAD:
smi_client_entry_exists : client info against which we need to match : IP:178.172.78.99, MAC:ccd5.390f.be80
Jan 26 09:37:34.868: VSTACK_DOWNLOAD:
smi_client_entry_match_mac : current entry in list: IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:37:34.868: VSTACK_DOWNLOAD:
 smi_client_entry_exists : the client_info is present in the client_info list
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_prepare_option67: copied the tailored cfg file
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_prepare_opt150: create the option 150 ip addr
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_insert_dhcp_options:image name is , cfg name is
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_prepare_opt125: create the option 125
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
!! smi_parse_cfg_img_file_dhcp_opt : server ip address not found
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt5: inserting dummy image file name
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt16: create the sub option 16 dir ip addr
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_insert_dhcp_options: hostname option not present
Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 1st option tftp (150)

Jan 26 09:37:34.868: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 2nd option tftp (150), 3rd option vendor (125)

Jan 26 09:37:34.874: VSTACK_PROTOCOL:
smi_insert_dhcp_options: Inside DHCP options
Jan 26 09:37:34.874: VSTACK_PROTOCOL:
smi_dhcp_shim_interesting_offer:No vstack options inserted, packet
                        may be flooded,
 out_vlan_id is 0
Jan 26 09:37:34.874: VSTACK_PROTOCOL:
smi_insert_dhcp_options: Inside DHCP options
Jan 26 09:37:34.874: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_mac: Input Mac address is: ccd5.390f.be80
Jan 26 09:37:34.875: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: Entry mac for connectivity ccd5.390f.be80
Jan 26 09:37:34.875: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: input port and ip TenGigabitEthernet1/15 192.168.1.1
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_conn: Input address is: 192.168.1.1
Jan 26 09:37:34.875: VSTACK_GROUP:
 and interface is: TenGigabitEthernet1/15
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input ip:192.168.1.1, list ip 192.168.1.1
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input port TenGigabitEthernet1/15, list port TenGigabitEthernet1/15
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_conn: error return:
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Input Sku-id is: WS-C3560CG-8TC-S
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Group is: test
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: error return
Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku is WS-C3560CG-8TC-S

Jan 26 09:37:34.875: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku No 165

Jan 26 09:37:34.875: VSTACK_GROUP:
!!smi_get_group_info: Failed to get the CFG or IMG
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_ibd_get_image_config_name_from_chaddr: Did not match any group, the default group is also not configured
Jan 26 09:37:34.875: %SMI-6-INCORRECT_CFG: No image and config configured for this sku type WS-C3560CG-8TC-S
Jan 26 09:37:34.875: VSTACK_DOWNLOAD:
smi_client_entry_exists : client info against which we need to match : IP:178.172.78.99, MAC:ccd5.390f.be80
Jan 26 09:37:34.875: VSTACK_DOWNLOAD:
smi_client_entry_match_mac : current entry in list: IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:37:34.875: VSTACK_DOWNLOAD:
 smi_client_entry_exists : the client_info is present in the client_info list
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_prepare_option67: copied the tailored cfg file
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_prepare_opt150: create the option 150 ip addr
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_insert_dhcp_options:image name is , cfg name is
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_prepare_opt125: create the option 125
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
!! smi_parse_cfg_img_file_dhcp_opt : server ip address not found
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt5: inserting dummy image file name
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt16: create the sub option 16 dir ip addr
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_insert_dhcp_options: hostname option not present
Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 1st option tftp (150)

Jan 26 09:37:34.875: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 2nd option tftp (150), 3rd option vendor (125)

Jan 26 09:37:39.628: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:37:39.628: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:37:39.628: VSTACK:
 received vlan_plus_seqno=FF650001, seq no for vlan = 65381,prev_seq_no=65381 port_mode =0
Jan 26 09:37:39.628: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:37:39.628: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:37:39.628: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:37:39.628: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 192.168.1.100,
           host_name : ss-stps-tb.test.arnes.si, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:37:39.628: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:39.628: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:37:39.628: VSTACK_DIR_DB: smi_cdp_process:In process calling Handler for MSG typ 0
Jan 26 09:37:39.628: VSTACK_DIR_DB: smi_handle_cdp_event: ADD NEIGH EVENT
Jan 26 09:37:39.628: VSTACK_DIR_DB:
smi_handle_cdp_event: Switch(ccd5.390f.be80) replace type=Same Switch
Jan 26 09:37:39.629: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:37:39.629: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry is called.
Jan 26 09:37:39.629: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry: Switch is not active or invalid RED MODE!
Jan 26 09:37:39.629: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:37:39.629: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:39.629: VSTACK_DIR_DB: Match Found
Jan 26 09:37:39.629: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:37:39.629: VSTACK_DIR_DB: Ports : local GigabitEthernet0/10, out port TenGigabitEthernet1/15
Jan 26 09:37:39.629: VSTACK_DIR_DB: Match Found
Jan 26 09:37:39.629: VSTACK_PROTOCOL:
smi_check_init_disc_send_again: ibc ip(192.168.1.100) is non-zero, enqueued to ibc_update_q to send init_disc again
Jan 26 09:37:39.629: VSTACK_EMULATION:
smi_get_sku_type: passed string is WS-C3560CG-8TC-S
Jan 26 09:37:39.629: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:37:39.629: VSTACK_PROTOCOL: SI: client open successful

Jan 26 09:37:39.629: VSTACK_PROTOCOL: SI: memory set succesful

Jan 26 09:37:41.634: VSTACK_PROTOCOL: SI: socket connect successful

Jan 26 09:37:41.635: VSTACK_PROTOCOL:
smi_socket_open: socket is BLOCKING
Jan 26 09:37:41.635: VSTACK_PROTOCOL:
 smi_send_data: data len is :36
Jan 26 09:37:41.635: VSTACK_PROTOCOL:
 smi_send_data: from : 1
Jan 26 09:37:41.635: VSTACK_PROTOCOL: SMI: data send successfull of bytes: 52

Jan 26 09:37:41.635: VSTACK_PROTOCOL: SMI: Socket close successfull

Jan 26 09:37:41.635: VSTACK_PROTOCOL:
 smi_ibd_send_ibd_init_disc: Successfully send the IBD Init Discovery Message to IBC : 192.168.1.100
Jan 26 09:37:54.272: VSTACK_PROTOCOL: smi_ibd_comm_server_socket: Socket accept succesfull

Jan 26 09:37:54.272: VSTACK_FSM: 33, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_create_action
Jan 26 09:37:54.272: VSTACK_FSM:
smi_ibds_sm_init: SMI_IBDS fsm init SUCCESS
Jan 26 09:37:54.272: VSTACK_FSM: 40, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_accept_action
Jan 26 09:37:54.272: VSTACK_FSM: 53, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_send_ann_action
Jan 26 09:37:54.272: VSTACK_PROTOCOL:
 smi_ibd_comm_server_socket: FSM created for the client
Jan 26 09:37:54.273: VSTACK_PROTOCOL:
 smi_sm_get_conn_from_fd : the fd is present in the conn fd list
Jan 26 09:37:54.273: VSTACK_PROTOCOL:
 smi_socket_recv_read_hdr : Complete Header Read : 16
Jan 26 09:37:54.273: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr: Message type=1, ip=192.168.1.100
Jan 26 09:37:54.273: VSTACK_PROTOCOL:
smi_compare_msg_hdr_type:ibc msg_hdr type is 1
Jan 26 09:37:54.273: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr : data length = 692
Jan 26 09:37:54.274: VSTACK_PROTOCOL:
smi_socket_read_start: header read complete, next data read
Jan 26 09:37:54.274: VSTACK_PROTOCOL:
smi_handle_recv_msg: SMI_MSG_FRM_IBC_CLI
Jan 26 09:37:54.274: VSTACK_PROTOCOL:
smi_set_ibc_version_info: message header version=1
Jan 26 09:37:54.274: VSTACK_PROTOCOL:
smi_set_ibc_version_info: Device(ccd5.390f.be80) smi version(1) is being updated to 1
Jan 26 09:37:54.274: VSTACK_PROTOCOL:
 smi_handle_ibd_recv_msg : 1 type received
Jan 26 09:37:54.274: VSTACK_FSM: 58, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_recv_cdp_action
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the Msg Len as 692 & readptr:1549863432 & endptr:1549864124
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1549863436 & endptr:1549864124
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 1 and TLV len as 16 & buff is 672
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_get_cdp_msg_seq_tlv:The header info is..msg:1, msg_count:2, mac:ccd5.390f.be80
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Allocating the mme for cdp update
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the data as msgs :2, mac:ccd5.390f.be80
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1549863456 & endptr:1549864124
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 2 and TLV len as 668 & buff is 0
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_get_ibc_info_tlv:IBC contents are mac ccd5.390f.be80, host_name :ss-stps-tb, sku: WS-C3560CG-8TC-S, serial: FOC1644Y62J
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:TLV_TYPE_IBC with contents mac ccd5.390f.be80,
                   host_name :ss-stps-tb, sku: WS-C3560CG-8TC-S, serial: FOC1644Y62J
Jan 26 09:37:54.274: VSTACK_DIR_DB: smi_cdp_msg_handler:Adding the data to RCV Q
Jan 26 09:37:54.274: VSTACK_FSM: 81, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_exit_action
Jan 26 09:37:54.274: VSTACK_FSM: 48, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_close_conn_action
Jan 26 09:37:54.274: VSTACK_PROTOCOL:
 smi_socket_recv_data: Complete read of data has happened
Jan 26 09:37:54.276: VSTACK_PROTOCOL: smi_ibd_comm_server_socket: Socket accept succesfull

Jan 26 09:37:54.276: VSTACK_FSM: 33, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_create_action
Jan 26 09:37:54.277: VSTACK_FSM:
smi_ibds_sm_init: SMI_IBDS fsm init SUCCESS
Jan 26 09:37:54.277: VSTACK_FSM: 40, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_accept_action
Jan 26 09:37:54.277: VSTACK_FSM: 53, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_send_ann_action
Jan 26 09:37:54.277: VSTACK_PROTOCOL:
 smi_ibd_comm_server_socket: FSM created for the client
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
 smi_sm_get_conn_from_fd : the fd is present in the conn fd list
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
 smi_socket_recv_read_hdr : Complete Header Read : 16
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr: Message type=1, ip=192.168.1.100
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
smi_compare_msg_hdr_type:ibc msg_hdr type is 1
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr : data length = 708
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
smi_socket_read_start: header read complete, next data read
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
smi_handle_recv_msg: SMI_MSG_FRM_IBC_CLI
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
smi_set_ibc_version_info: message header version=1
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
smi_set_ibc_version_info: Device(ccd5.390f.be80) smi version(1) is being updated to 1
Jan 26 09:37:54.278: VSTACK_PROTOCOL:
 smi_handle_ibd_recv_msg : 1 type received
Jan 26 09:37:54.278: VSTACK_FSM: 58, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_recv_cdp_action
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the Msg Len as 708 & readptr:1552268480 & endptr:1552269188
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1552268484 & endptr:1552269188
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 1 and TLV len as 16 & buff is 688
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_get_cdp_msg_seq_tlv:The header info is..msg:2, msg_count:2, mac:ccd5.390f.be80
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Found the CDP Entry in RCV Q for ccd5.390f.be80
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the data as msgs :2, mac:ccd5.390f.be80
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1552268504 & endptr:1552269188
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 4 and TLV len as 684 & buff is 0
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_get_neighbor_info_tlv: Got the Nei count as 1 & alloc mem of 684
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler:Fill TLV_TYPE_NEI with contents  mac c08c.60e0.2d10,
                       host_name :4500x, sku: WS-C4500X-16, sup: WS-C4500X-16, port_mac: ccd5.390f.be80, ports->local :GigabitEthernet0/10,
                       out :TenGigabitEthernet1/15
Jan 26 09:37:54.278: VSTACK_DIR_DB: smi_cdp_msg_handler: Enqueuing to the process fromRCV Q
Jan 26 09:37:54.278: VSTACK_FSM: 81, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_exit_action
Jan 26 09:37:54.278: VSTACK_FSM: 48, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_close_conn_action
Jan 26 09:37:54.279: VSTACK_PROTOCOL:
 smi_socket_recv_data: Complete read of data has happened
Jan 26 09:37:54.279: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry is called.
Jan 26 09:37:54.279: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry: Switch is not active or invalid RED MODE!
Jan 26 09:37:54.279: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling:Got announcement msg from switch(ccd5.390f.be80)
Jan 26 09:37:54.279: VSTACK:
 IBD= Send UPD MGMT VLAN Req MSG from IBD:192.168.1.1 to IBC:192.168.1.100
Jan 26 09:37:54.279: VSTACK_PROTOCOL: SI: client open successful

Jan 26 09:37:54.279: VSTACK_PROTOCOL: SI: memory set succesful

Jan 26 09:37:54.284: VSTACK_PROTOCOL: SI: socket connect successful

Jan 26 09:37:54.284: VSTACK_PROTOCOL:
smi_socket_open: socket is BLOCKING
Jan 26 09:37:54.284: VSTACK_PROTOCOL:
 smi_send_data: data len is :4
Jan 26 09:37:54.284: VSTACK_PROTOCOL:
 smi_send_data: from : 1
Jan 26 09:37:54.284: VSTACK_PROTOCOL: SMI: data send successfull of bytes: 20

Jan 26 09:37:54.284: VSTACK_PROTOCOL: SMI: Socket close successfull

Jan 26 09:37:54.284: VSTACK_PROTOCOL:
smi_version_compare2: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:37:54.284: VSTACK_PROTOCOL:
smi_version_compare2: ver is 2
Jan 26 09:37:54.284: VSTACK_PROTOCOL:
smi_version_compare2 : value is 2
Jan 26 09:37:54.284: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling:Checking if the neighbor(c08c.60e0.2d10) is replaced
Jan 26 09:37:54.284: VSTACK_DIR_DB:
smi_check_if_switch_is_replaced:Rep - cfg_bkp_feature is ON
Jan 26 09:37:54.284: VSTACK_DIR_DB:
smi_check_if_switch_is_replaced:Rep - local_port=GigabitEthernet0/10, out_port=TenGigabitEthernet1/15
Jan 26 09:37:54.284: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: neighbor mac=ccd5.390f.be80, new sku=WS-C4500X-16, port attached=GigabitEthernet0/10
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: input port GigabitEthernet0/10, target port GigabitEthernet0/10, port Matched
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: input platform WS-C4500X-16, target platform WS-C4500X-16
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: input mac c08c.60e0.2d10, target mac c08c.60e0.2d10
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: sku also matched
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: Mac(c08c.60e0.2d10) matched. So its same switch
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_check_if_switch_is_replaced:c08c.60e0.2d10 either not a replacement or else same switch
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling: Switch(c08c.60e0.2d10) replace type=Same Switch
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling:***Check if neighbor need to be added again***
Jan 26 09:37:54.285: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling:Neighbor entry found, will update it
Jan 26 09:37:54.285: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:37:54.285: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:37:54.285: VSTACK_DIR_DB: Match Found
Jan 26 09:37:54.285: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:37:54.285: VSTACK_DIR_DB: Ports : local GigabitEthernet0/10, out port TenGigabitEthernet1/15
Jan 26 09:37:54.285: VSTACK_DIR_DB: Match Found
Jan 26 09:37:54.285: VSTACK_DIR_DB: smi_calc_hop_value: GO the Best Hop as 0 for ss-stps-tb
Jan 26 09:37:54.285: VSTACK_DIR_DB: smi_calc_hop_value: Returning with HOP as 1 for ss-stps-tb
Jan 26 09:38:01.188: VSTACK_DIR_DB: smi_parse_cdp_cache_entry: Mac addr received from cdp app tlv Neig mac ccd5.390f.be80, Local Mac c08c.60e0.2d10
Jan 26 09:38:01.188: VSTACK: smi_parse_cdp_cache_entry:processing the cdp pkt for mgmt vlan

Jan 26 09:38:01.188: VSTACK:
 received vlan_plus_seqno=29F0001, seq no for vlan = 671,prev_seq_no=65381 port_mode =0
Jan 26 09:38:01.188: VSTACK_DIR_DB:
smi_parse_cdp_cache_entry: Failed to get the supervisor info
Jan 26 09:38:01.188: VSTACK_DIR_DB: smi_parse_cdp_cache_entry:string in parse WS-C3560CG-8TC-S
Jan 26 09:38:01.189: VSTACK_DIR_DB: smi_enqueue_cdp_pkt_q_entry:IBC entry details are ....
Jan 26 09:38:01.189: VSTACK_DIR_DB: mac_add: ccd5.390f.be80, ip_add: 192.168.1.100,
           host_name : ss-stps-tb.test.arnes.si, platform : WS-C3560CG-8TC-S , port_mac : c08c.60e0.2d10
Jan 26 09:38:01.189: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:38:01.189: VSTACK_DIR_DB:  Supervisor Model Type: NF
Jan 26 09:38:01.189: VSTACK_DIR_DB: smi_cdp_update_process:In process calling Handler for MSG typ 2
Jan 26 09:38:01.189: VSTACK_DIR_DB: smi_handle_cdp_event: UPDATE NEIGH EVENT
Jan 26 09:38:01.189: VSTACK_DIR_DB:
smi_check_init_disc_send_again: neighbor ip 192.168.1.100, discovery queue could be empty, so not checking if discovery msg needs to be sent again
Jan 26 09:38:01.189: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:38:01.189: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry is called.
Jan 26 09:38:01.189: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry: Switch is not active or invalid RED MODE!
Jan 26 09:38:03.301: VSTACK_PROTOCOL: smi_ibd_comm_server_socket: Socket accept succesfull

Jan 26 09:38:03.301: VSTACK_FSM: 33, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_create_action
Jan 26 09:38:03.301: VSTACK_FSM:
smi_ibds_sm_init: SMI_IBDS fsm init SUCCESS
Jan 26 09:38:03.301: VSTACK_FSM: 40, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_accept_action
Jan 26 09:38:03.301: VSTACK_FSM: 53, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_send_ann_action
Jan 26 09:38:03.301: VSTACK_PROTOCOL:
 smi_ibd_comm_server_socket: FSM created for the client
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
 smi_sm_get_conn_from_fd : the fd is present in the conn fd list
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
 smi_socket_recv_read_hdr : Complete Header Read : 16
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr: Message type=6, ip=192.168.1.100
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
smi_compare_msg_hdr_type:ibc msg_hdr type is 6
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr : data length = 6
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
smi_socket_read_start: header read complete, next data read
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
smi_handle_recv_msg: SMI_MSG_FRM_IBC_CLI
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
smi_set_ibc_version_info: message header version=0
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
smi_set_ibc_version_info: Device(ccd5.390f.be80) smi version(1) is being updated to 0
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
 smi_handle_ibd_recv_msg : 6 type received
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
 smi_ibd_handle_version_req : Received Version Request from IBC(192.168.1.100)
Jan 26 09:38:03.302: VSTACK_PROTOCOL:
 smi_ibds_process_version_req: received version request info
Jan 26 09:38:03.302: VSTACK_FSM: 68, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_recv_ver_req
Jan 26 09:38:03.302: VSTACK_GROUP:
smi_get_img_cfg_from_mac: Input Mac address is: ccd5.390f.be80
Jan 26 09:38:03.303: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: Entry mac for connectivity ccd5.390f.be80
Jan 26 09:38:03.303: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: input port and ip TenGigabitEthernet1/15 192.168.1.1
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_conn: Input address is: 192.168.1.1
Jan 26 09:38:03.303: VSTACK_GROUP:
 and interface is: TenGigabitEthernet1/15
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input ip:192.168.1.1, list ip 192.168.1.1
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input port TenGigabitEthernet1/15, list port TenGigabitEthernet1/15
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_conn: error return:
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Input Sku-id is: WS-C3560CG-8TC-S
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Group is: test
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: error return
Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku is WS-C3560CG-8TC-S

Jan 26 09:38:03.303: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku No 165

Jan 26 09:38:03.303: VSTACK_GROUP:
!!smi_get_group_info: Failed to get the CFG or IMG
Jan 26 09:38:03.303: VSTACK_PROTOCOL:
!!smi_ibds_process_version_req: Failed to get the cfg
Jan 26 09:38:03.303: VSTACK_DOWNLOAD:
smi_client_entry_exists : client info against which we need to match : IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:03.303: VSTACK_DOWNLOAD:
smi_client_entry_match_mac : current entry in list: IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:03.303: VSTACK_DOWNLOAD:
 smi_client_entry_exists : the client_info is present in the client_info list
Jan 26 09:38:03.303: VSTACK_DOWNLOAD:
smi_new_client_info_add_to_dl_status_list : Overriding an existing entry that is still upgrading
Jan 26 09:38:03.303: VSTACK_DOWNLOAD:
smi_new_client_info_add_to_dl_status_list client MAC exists, need not enqueue
Jan 26 09:38:03.303: VSTACK_DIR_DB: smi_chkpt_update_database: Message 28 received.
Jan 26 09:38:03.304: VSTACK_DIR_DB: smi_chkpt_update_database: Switch is not Active or Invalid RED MODE!
Jan 26 09:38:03.304: VSTACK_PROTOCOL:
smi_ibd_send_ver_resp: send version info data from IBC
Jan 26 09:38:03.304: VSTACK_FSM: 81, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_exit_action
Jan 26 09:38:03.304: VSTACK_FSM: 48, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_close_conn_action
Jan 26 09:38:03.305: VSTACK_PROTOCOL:
 smi_socket_recv_data: Complete read of data has happened
Jan 26 09:38:03.367: VSTACK_PROTOCOL: smi_ibd_comm_server_socket: Socket accept succesfull

Jan 26 09:38:03.367: VSTACK_FSM: 33, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_create_action
Jan 26 09:38:03.367: VSTACK_FSM:
smi_ibds_sm_init: SMI_IBDS fsm init SUCCESS
Jan 26 09:38:03.367: VSTACK_FSM: 40, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_accept_action
Jan 26 09:38:03.367: VSTACK_FSM: 53, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_send_ann_action
Jan 26 09:38:03.367: VSTACK_PROTOCOL:
 smi_ibd_comm_server_socket: FSM created for the client
Jan 26 09:38:03.367: VSTACK_PROTOCOL:
 smi_sm_get_conn_from_fd : the fd is present in the conn fd list
Jan 26 09:38:03.367: VSTACK_PROTOCOL:
 smi_socket_recv_read_hdr : Complete Header Read : 16
Jan 26 09:38:03.367: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr: Message type=7, ip=192.168.1.100
Jan 26 09:38:03.367: VSTACK_PROTOCOL:
smi_compare_msg_hdr_type:ibc msg_hdr type is 7
Jan 26 09:38:03.367: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr : data length = 416
Jan 26 09:38:03.367: VSTACK_PROTOCOL:
smi_socket_read_start: header read complete, next data read
Jan 26 09:38:03.368: VSTACK_PROTOCOL:
smi_handle_recv_msg: SMI_MSG_FRM_IBC_CLI
Jan 26 09:38:03.368: VSTACK_PROTOCOL:
smi_set_ibc_version_info: message header version=1
Jan 26 09:38:03.368: VSTACK_PROTOCOL:
smi_set_ibc_version_info: Device(ccd5.390f.be80) smi version(0) is being updated to 1
Jan 26 09:38:03.368: VSTACK_PROTOCOL:
 smi_handle_ibd_recv_msg : 7 type received
Jan 26 09:38:03.368: VSTACK_GROUP:
smi_ibd_handle_upgrade_msg:Client ip from up_msg and connection are 192.168.1.100 192.168.1.100
Jan 26 09:38:03.368: %SMI-3-UPGRD_FAILED: Device (IP address: 192.168.1.100) image upgrade failed
Jan 26 09:38:03.368: VSTACK_JW:
smi_set_cfg_img_upgrade_status: img_status 2 cfg_status 5, spt_status 5, in_ql_jw now is 3
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
smi_client_entry_exists : client info against which we need to match : IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
smi_client_entry_match_mac : current entry in list: IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
 smi_client_entry_exists : the client_info is present in the client_info list
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
 smi_edit_cfg_img_upgrade_status : the client is upgrading yet
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
smi_client_entry_exists : client info against which we need to match : IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
smi_client_entry_match_mac : current entry in list: IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
 smi_client_entry_exists : the client_info is present in the client_info list
Jan 26 09:38:03.368: VSTACK_DOWNLOAD:
 smi_delete_tar_image_list : the client_info is present in the client_info list
Jan 26 09:38:03.368: VSTACK_FSM: 81, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_exit_action
Jan 26 09:38:03.368: VSTACK_FSM: 48, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_close_conn_action
Jan 26 09:38:03.368: VSTACK_PROTOCOL:
 smi_socket_recv_data: Complete read of data has happened
Jan 26 09:38:04.984: VSTACK_PROTOCOL: smi_ibd_comm_server_socket: Socket accept succesfull

Jan 26 09:38:04.984: VSTACK_FSM: 33, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_create_action
Jan 26 09:38:04.984: VSTACK_FSM:
smi_ibds_sm_init: SMI_IBDS fsm init SUCCESS
Jan 26 09:38:04.984: VSTACK_FSM: 40, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_accept_action
Jan 26 09:38:04.984: VSTACK_FSM: 53, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_send_ann_action
Jan 26 09:38:04.984: VSTACK_PROTOCOL:
 smi_ibd_comm_server_socket: FSM created for the client
Jan 26 09:38:04.985: VSTACK_PROTOCOL:
 smi_sm_get_conn_from_fd : the fd is present in the conn fd list
Jan 26 09:38:04.985: VSTACK_PROTOCOL:
 smi_socket_recv_read_hdr : Complete Header Read : 16
Jan 26 09:38:04.985: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr: Message type=1, ip=192.168.1.100
Jan 26 09:38:04.985: VSTACK_PROTOCOL:
smi_compare_msg_hdr_type:ibc msg_hdr type is 1
Jan 26 09:38:04.985: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr : data length = 692
Jan 26 09:38:04.985: VSTACK_PROTOCOL:
smi_socket_read_start: header read complete, next data read
Jan 26 09:38:04.986: VSTACK_PROTOCOL:
smi_handle_recv_msg: SMI_MSG_FRM_IBC_CLI
Jan 26 09:38:04.986: VSTACK_PROTOCOL:
smi_set_ibc_version_info: message header version=1
Jan 26 09:38:04.986: VSTACK_PROTOCOL:
smi_set_ibc_version_info: Device(ccd5.390f.be80) smi version(1) is being updated to 1
Jan 26 09:38:04.986: VSTACK_PROTOCOL:
 smi_handle_ibd_recv_msg : 1 type received
Jan 26 09:38:04.986: VSTACK_FSM: 58, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_recv_cdp_action
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the Msg Len as 692 & readptr:1549036272 & endptr:1549036964
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1549036276 & endptr:1549036964
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 1 and TLV len as 16 & buff is 672
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_get_cdp_msg_seq_tlv:The header info is..msg:1, msg_count:2, mac:ccd5.390f.be80
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Allocating the mme for cdp update
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the data as msgs :2, mac:ccd5.390f.be80
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1549036296 & endptr:1549036964
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 2 and TLV len as 668 & buff is 0
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_get_ibc_info_tlv:IBC contents are mac ccd5.390f.be80, host_name :ss-stps-tb, sku: WS-C3560CG-8TC-S, serial: FOC1644Y62J
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:TLV_TYPE_IBC with contents mac ccd5.390f.be80,
                   host_name :ss-stps-tb, sku: WS-C3560CG-8TC-S, serial: FOC1644Y62J
Jan 26 09:38:04.986: VSTACK_DIR_DB: smi_cdp_msg_handler:Adding the data to RCV Q
Jan 26 09:38:04.986: VSTACK_FSM: 81, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_exit_action
Jan 26 09:38:04.986: VSTACK_FSM: 48, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_close_conn_action
Jan 26 09:38:04.986: VSTACK_PROTOCOL:
 smi_socket_recv_data: Complete read of data has happened
Jan 26 09:38:04.989: VSTACK_PROTOCOL: smi_ibd_comm_server_socket: Socket accept succesfull

Jan 26 09:38:04.989: VSTACK_FSM: 33, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_create_action
Jan 26 09:38:04.989: VSTACK_FSM:
smi_ibds_sm_init: SMI_IBDS fsm init SUCCESS
Jan 26 09:38:04.989: VSTACK_FSM: 40, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_accept_action
Jan 26 09:38:04.989: VSTACK_FSM: 53, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_send_ann_action
Jan 26 09:38:04.989: VSTACK_PROTOCOL:
 smi_ibd_comm_server_socket: FSM created for the client
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
 smi_sm_get_conn_from_fd : the fd is present in the conn fd list
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
 smi_socket_recv_read_hdr : Complete Header Read : 16
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr: Message type=1, ip=192.168.1.100
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
smi_compare_msg_hdr_type:ibc msg_hdr type is 1
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
smi_socket_recv_read_hdr : data length = 708
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
smi_socket_read_start: header read complete, next data read
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
smi_handle_recv_msg: SMI_MSG_FRM_IBC_CLI
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
smi_set_ibc_version_info: message header version=1
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
smi_set_ibc_version_info: Device(ccd5.390f.be80) smi version(1) is being updated to 1
Jan 26 09:38:04.990: VSTACK_PROTOCOL:
 smi_handle_ibd_recv_msg : 1 type received
Jan 26 09:38:04.990: VSTACK_FSM: 58, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_recv_cdp_action
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the Msg Len as 708 & readptr:1545645368 & endptr:1545646076
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1545645372 & endptr:1545646076
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 1 and TLV len as 16 & buff is 688
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_get_cdp_msg_seq_tlv:The header info is..msg:2, msg_count:2, mac:ccd5.390f.be80
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Found the CDP Entry in RCV Q for ccd5.390f.be80
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the data as msgs :2, mac:ccd5.390f.be80
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Curr readptr:1545645392 & endptr:1545646076
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Got the TLV type as 4 and TLV len as 684 & buff is 0
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_get_neighbor_info_tlv: no Got the Nei count as 1 & alloc mem of 684
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler:Fill TLV_TYPE_NEI with contents  mac c08c.60e0.2d10,
                       host_name :4500x, sku: WS-C4500X-16, sup: WS-C4500X-16, port_mac: ccd5.390f.be80, ports->local :GigabitEthernet0/10,
                       out :TenGigabitEthernet1/15
Jan 26 09:38:04.990: VSTACK_DIR_DB: smi_cdp_msg_handler: Enqueuing to the process fromRCV Q
Jan 26 09:38:04.990: VSTACK_FSM: 81, ../VIEW_ROOT/cisco.comp/smartinsdebu tall/src/smi_ibd_serv_sm.c, ibds_exit_action
Jan 26 09:38:04.991: VSTACK_FSM: 48, ../VIEW_ROOT/cisco.comp/smartinstall/src/smi_ibd_serv_sm.c, ibds_close_conn_action
Jan 26 09:38:04.991: VSTACK_PROTOCOL:
 smi_socket_recv_data: Complete read of data has happened
Jan 26 09:38:04.991: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry is called.
Jan 26 09:38:04.991: VSTACK_DIR_DB: smi_chkpt_add_update_cdp_db_entry: Switch is not active or invalid RED MODE!
Jan 26 09:38:04.991: VSTACK_DIR_DB:
smi_ibd_cdpall
All possible debugging has been turned off
4500x#_announcment_msg_handling:Got announcement msg from switch(ccd5.390f.be80)
Jan 26 09:38:04.991: VSTACK:
 IBD= Send UPD MGMT VLAN Req MSG from IBD:192.168.1.1 to IBC:192.168.1.100
Jan 26 09:38:04.991: VSTACK_PROTOCOL: SI: client open successful

Jan 26 09:38:04.991: VSTACK_PROTOCOL: SI: memory set succesful

Jan 26 09:38:04.996: VSTACK_PROTOCOL: SI: socket connect successful

Jan 26 09:38:04.996: VSTACK_PROTOCOL:
smi_socket_open: socket is BLOCKING
Jan 26 09:38:04.996: VSTACK_PROTOCOL:
 smi_send_data: data len is :4
Jan 26 09:38:04.996: VSTACK_PROTOCOL:
 smi_send_data: from : 1
Jan 26 09:38:04.996: VSTACK_PROTOCOL: SMI: data send successfull of bytes: 20

Jan 26 09:38:04.996: VSTACK_PROTOCOL: SMI: Socket close successfull

Jan 26 09:38:04.996: VSTACK_PROTOCOL:
smi_version_compare2: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:38:04.996: VSTACK_PROTOCOL:
smi_version_compare2: ver is 2
Jan 26 09:38:04.996: VSTACK_PROTOCOL:
smi_version_compare2 : value is 2
Jan 26 09:38:04.996: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling:Checking if the neighbor(c08c.60e0.2d10) is replaced
Jan 26 09:38:04.996: VSTACK_DIR_DB:
smi_check_if_switch_is_replaced:Rep - cfg_bkp_feature is ON
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_check_if_switch_is_replaced:Rep - local_port=GigabitEthernet0/10, out_port=TenGigabitEthernet1/15
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: neighbor mac=ccd5.390f.be80, new sku=WS-C4500X-16, port attached=GigabitEthernet0/10
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: input port GigabitEthernet0/10, target port GigabitEthernet0/10, port Matched
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: input platform WS-C4500X-16, target platform WS-C4500X-16
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: input mac c08c.60e0.2d10, target mac c08c.60e0.2d10
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: sku also matched
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_same_sku_exists_at_port:Rep: Mac(c08c.60e0.2d10) matched. So its same switch
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_check_if_switch_is_replaced:c08c.60e0.2d10 either not a replacement or else same switch
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling: Switch(c08c.60e0.2d10) replace type=Same Switch
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling:***Check if neighbor need to be added again***
Jan 26 09:38:04.997: VSTACK_DIR_DB:
smi_ibd_cdp_announcment_msg_handling:Neighbor entry found, will update it
Jan 26 09:38:04.997: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:38:04.997: VSTACK_DIR_DB: Ports : local TenGigabitEthernet1/15, out port GigabitEthernet0/10
Jan 26 09:38:04.997: VSTACK_DIR_DB: Match Found
Jan 26 09:38:04.997: VSTACK_DIR_DB: smi_cdp_add_red_links:Trying to ADD the RED Links ....
Jan 26 09:38:04.997: VSTACK_DIR_DB: Ports : local GigabitEthernet0/10, out port TenGigabitEthernet1/15
Jan 26 09:38:04.997: VSTACK_DIR_DB: Match Found
Jan 26 09:38:04.997: VSTACK_DIR_DB: smi_calc_hop_value: GO the Best Hop as 0 for ss-stps-tb
Jan 26 09:38:04.997: VSTACK_DIR_DB: smi_calc_hop_value: Returning with HOP as 1 for ss-stps-tb
Jan 26 09:38:07.942: VSTno ACK_PROTOCOL:
smi_insert_dhcp_options: Inside DHCP options
Jan 26 09:38:07.942: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_mac: Input Mac address is: ccd5.390f.be80
Jan 26 09:38:0debu7.942: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: Entry mac for connectivity ccd5.390f.be80
Jan 26 09:38:07.942: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: input port and ip TenGigabitEthernet1/15 192.168.1.1
Jan 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_conn: Input address is: 192.168.1.1
Jan 26 09:38:07.942: VSTACK_GROUP:
 and interface is: TenGigabitEthernet1/15
Jan 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input ip:192.168.1.1, list ip 192.168.1.1
Jang all 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input port TenGigabitEthernet1/15, list port TenGigabitEthernet1/15
Jan 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_conn: error return:
Jan 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Input Sku-id is: WS-C3560CG-8TC-S
Jan 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Group is: test
Jan 26 09:38:07.942: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: error return
Jan 26 09:38:07.942: VSTACK_GROUP:
sm
All possible debugging has been turned off
4500x#i_get_img_cfg_from_sku: Sku is WS-C3560CG-8TC-S

Jan 26 09:38:07.943: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku No 165

Jan 26 09:38:07.943: VSTACK_GROUP:
!!smi_get_group_info: Failed to get the CFG or IMG
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_ibd_get_image_config_name_from_chaddr: Did not match any group, the default group is also not configured
Jan 26 09:38:07.943: %SMI-6-INCORRECT_CFG: No image and config configured for this sku type WS-C3560CG-8TC-S
Jan 26 09:38:07.943: VSTACK_DOWNLOAD:
smi_client_entry_exists : client info against which we need to match : IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:07.943: VSTACK_DOWNLOAD:
smi_client_entry_match_mac : current entry in list: IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:07.943: VSTACK_DOWNLOAD:
 smi_client_entry_exists : the client_info is present in the client_info list
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_prepare_option67: copied the tailored cfg file
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_prepare_opt150: create the option 150 ip addr
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_insert_dhcp_options:image name is , cfg name is
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_prepare_opt125: create the option 125
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
!! smi_parse_cfg_img_file_dhcp_opt : server ip address not found
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt5: inserting dummy image file name
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt16: create the sub option
4500x#16 dir ip addr
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_insert_dhcp_options: hostname option not present
Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 1st option tftp (150)

Jan 26 09:38:07.943: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 2nd option tftp (150), 3rd option vendor (125)

Jan 26 09:38:39.009: VSTACK_PROTOCOL:
smi_insert_dhcp_options: Inside DHCP options
Jan 26 09:38:39.009: VSTACK_PROTOCOL:
smi_version_compare: version string is Cisco IOS Software, C3560C Software (C3560c405ex-UNIVERSALK9-M), Version 15.2(2)E, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Thu 26-Jun-14 18:51 by prod_rel_team
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_mac: Input Mac address is: ccd5.390f.be80
Jan 26 09:38:39.010: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: Entry mac for connectivity ccd5.390f.be80
Jan 26 09:38:39.010: VSTACK_DIR_DB:
smi_cdp_get_img_cfg_from_conn: input port and ip TenGigabitEthernet1/15 192.168.1.1
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_conn: Input address is: 192.168.1.1
Jan 26 09:38:39.010: VSTACK_GROUP:
 and interface is: TenGigabitEthernet1/15
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input ip:192.168.1.1, list ip 192.168.1.1
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_conn:input port TenGigabitEthernet1/15, list port TenGigabitEthernet1/15
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_conn: error return:
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Input Sku-id is: WS-C3560CG-8TC-S
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: Group is: test
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_sku_id: error return
Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku is WS-C3560CG-8TC-S

Jan 26 09:38:39.010: VSTACK_GROUP:
smi_get_img_cfg_from_sku: Sku No 165

Jan 26 09:38:39.010: VSTACK_GROUP:
!!smi_get_group_info: Failed to get the CFG or IMG
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_ibd_get_image_config_name_from_chaddr: Did not match any group, the default group is also not configured
Jan 26 09:38:39.010: %SMI-6-INCORRECT_CFG: No image and config configured for this sku type WS-C3560CG-8TC-S
Jan 26 09:38:39.010: VSTACK_DOWNLOAD:
smi_client_entry_exists : client info against which we need to match : IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:39.010: VSTACK_DOWNLOAD:
smi_client_entry_match_mac : current entry in list: IP:192.168.1.100, MAC:ccd5.390f.be80
Jan 26 09:38:39.010: VSTACK_DOWNLOAD:
 smi_client_entry_exists : the client_info is present in the client_info list
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_prepare_option67: copied the tailored cfg file
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_prepare_opt150: create the option 150 ip addr
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_insert_dhcp_options:image name is , cfg name is
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_prepare_opt125: create the option 125
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
!! smi_parse_cfg_img_file_dhcp_opt : server ip address not found
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt5: inserting dummy image file name
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_prepare_opt125_subopt16: create the sub option 16 dir ip addr
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_insert_dhcp_options: hostname option not present
Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 1st option tftp (150)

Jan 26 09:38:39.010: VSTACK_PROTOCOL:
smi_insert_dhcp_options: 2nd option tftp (150), 3rd option vendor (125)

 

 

1 Accepted Solution

Accepted Solutions

image bootflash:c3560c405ex-universalk9-tar.152-2.E.tar

Did you enable TFTP of this image?

vstack group custom test connectivity

This is still incorrect.  How will the switch know what model this is meant to be?  

 

What files do you have for this?  You need a minimum of THREE files (excluding the post-install script) ... what a second.  Post install script is not supported until 3.7.0E.  Just checked my notes and found that Post Install Script feature was enabled back in 3.6.0E so you're running the correct IOS.

 

Another thing, how do you know what is the IP address of the 3560CG?  Where's your DHCP pool for VStack?

 

Have you read link I've posted?  It contains a guide to configure custom group.   Please read it and don't "re-invent the wheel".

View solution in original post

9 Replies 9

Leo Laohoo
Hall of Fame
Hall of Fame
%SMI-6-INCORRECT_CFG: No image and config configured for this sku type WS-C3560CG-8TC-S

I would expect this message.  The configuration of the VStack has a lot of missing configuration.  You've got a 3560CG but where is your VStack built-in group?  Where is your TFTP server?  Where are the configuration template file location?  Where is the IOS file location? 

 

Have a look at THIS.

I'm not using VStack built-in group but Vstack custom group.

vstack group custom test connectivity

 image bootflash:c3560c405ex-universalk9-tar.152-2.E.tar
 config bootflash:test.txt
 script bootflash:test_vlan.txt

 

image bootflash:c3560c405ex-universalk9-tar.152-2.E.tar

Did you enable TFTP of this image?

vstack group custom test connectivity

This is still incorrect.  How will the switch know what model this is meant to be?  

 

What files do you have for this?  You need a minimum of THREE files (excluding the post-install script) ... what a second.  Post install script is not supported until 3.7.0E.  Just checked my notes and found that Post Install Script feature was enabled back in 3.6.0E so you're running the correct IOS.

 

Another thing, how do you know what is the IP address of the 3560CG?  Where's your DHCP pool for VStack?

 

Have you read link I've posted?  It contains a guide to configure custom group.   Please read it and don't "re-invent the wheel".

Did you enable TFTP of this image?

tftp-server bootflash:c3560c405ex-universalk9-tar.152-2.E.tar

tftp-server bootflash:test.txt tftp-server
bootflash:test_vlan.txt

This is still incorrect. How will the switch know what model this is meant to be?

I just want to configure switch on port 15. Switches on specific port receives specific configuration.

Another thing, how do you know what is the IP address of the 3560CG?  Where's your DHCP pool for VStack?

DHCP is configured on DHCP server. Switch gets IP depending from which port on switch came request.

I just want to configure switch on port 15. Switches on specific port receives specific configuration.

There is no Cisco switch model called "test".  If you want to enable VStack for a 3560CG then you'll need to do something like this:

 

vstack group built-in 3560cg 8-pd-poe
 image bootflash:c3560c405ex-universalk9-tar.152-2.E.tar
 config bootflash:test.txt
 script bootflash:test_vlan.txt

 

VStack looks at the CDP values and extrapolate the necessary data.  Because 3560CG is already part of VStack, you can set it up this way.  The only time you want to use the custom group is when your switch are not supported, such as Metro Ethernet switches.   

c3560c405ex-universalk9-tar.152-2.E.tar

I understand you may just be testing stuff but I would urge you to exercise a large degree of caution (and a dose of sanity).  I've tested this IOS.   I've also tested this IOS on the 3560CG-8P ... and if I was to put a rating between 0 to 10 (10 being the highest), I'd rate this version a NEGATIVE 9!

What about this:

You can configure a custom group based on the connectivity or topology of switches in a Smart Install network. For example, you would use a connectivity match to configure a group of switches that are connected to the director through a single interface or switches that are connected to the director through a specific intermediate switch. A connectivity match takes priority over product ID or stack number custom groups and over built-in groups, but not over groups based on MAC addresses. Switches that do not match the connectivity configuration would acquire the configuration file, post install file, and image in either a built-in group or through the default configuration.

 

 

Director# configure terminal
Director(config)# vstack director 1.1.1.20
Director(config)# vstack basic
Director(config)# vstack group custom textgroup2 connectivity
Director(config-vstack-group)# match host 1.1.1.10 interface GigabitEthernet 1/0/3
Director(config-vstack-group)# image tftp://101.122.33.10/c3750-ipbase-tar.122-52.SE.tar
Director(config-vstack-group)# config tftp://101.122.33.10/3750-24-ipbase_config.txt
Director(config-vstack-group)# script tftp://101.122.33.10/3750-24-ipbase_post_install.txt
Director(config-vstack-group)# exit 

This is from http://www.cisco.com/c/en/us/td/docs/switches/lan/smart_install/configuration/guide/smart_install.pdf

 

I don't understand what you are doing. 

 

So are you saying, "whatever is connected to port 15 will get the IOS for 3560CG and the configuration for 3560CG"?  Are you sure that only a 3560CG can/will connect to port 15?  What if someone connects a 2960S-24PDL?

 

How many associated files do you have and what are they?

I know which device will connect to port 15. Only one type of switches will connect. I have configuration file, IOS and post install for VLAN-s. Switch on specific port receives specific configuration.

 I have configuration file, IOS and post install for VLAN-s. 

Then you're missing one file.  Read the link I've posted.   You should have FOUR (4) files (including the post-install script).

I know which device will connect to port 15. Only one type of switches will connect.

I've never implemented what you are doing because of all the SmartInstall I've done, none of them have wanted this method.  

Review Cisco Networking for a $25 gift card