SNMP agent on host zxy switch is undergoing a cold start

[D RAVI KUMAR]

we have WS-C3650-48TQ-L module switch in our DC, but unfortunately only this switch has got a rebooted further check and noticed that SNMP agent undergoing a cold start. 

Need to know why we got such logs and how to overcome this issues.

%PLATFORM_PM-6-MODULE_INSERTED: SFP module inserted with interface name Te1/1/3
%SNMP-5-COLDSTART: SNMP agent on host acb is undergoing a cold start
%SYS-6-BOOTTIME: Time is taken to reboot after reload = 488 seconds

%PLATFORM_PM-6-MODULE_INSERTED: SFP module inserted with interface name Te1/1/4

[balaji.bandi]

This means that the device  has cold started, meaning that the device had lost its power and then regained its power.

post the  show version

[D RAVI KUMAR]

ES2#sh version | i uptime
ES2 uptime is 7 hours, 51 minutes

ES2#sh version | i WS-C3650-48TQ
cisco WS-C3650-48TQ (MIPS) processor (revision Q0) with 865070K/6147K bytes of memory.
Model Number : WS-C3650-48TQ
* 1 52 WS-C3650-48TQ 16.3.5 CAT3K_CAA-UNIVERSALK9 INSTALL
ES2#

ES2#sh clock
11:21:40.750 EDT Sat Oct 27 2018
ES2#

Below switch logs for the reference.

*Oct 27 02:46:27 EDT: %PLATFORM_PM-6-MODULE_INSERTED: SFP module inserted with interface name Te1/1/3

*Oct 27 02:46:27 EDT: %SNMP-5-COLDSTART: SNMP agent on host USUBS17ES2 is undergoing a cold start

*Oct 27 02:46:29 EDT: %SYS-6-BOOTTIME: Time taken to reboot after reload =  488 seconds

*Oct 27 02:46:29 EDT: %PLATFORM_PM-6-MODULE_INSERTED: SFP module inserted with interface name Te1/1/4

*Oct 27 02:46:34 EDT: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/1, changed state to up

*Oct 27 02:46:34 EDT: %LINK-3-UPDOWN: Interface GigabitEthernet1/0/3, changed state to up

ES2#sh version | i uptime

ES2 uptime is 7 hours, 36 minutes

ES2#sh clo

ES2#sh clock

06:22:23.084 EDT Sat Oct 27 2018

ES2#

ES2#sh  inventory | i "Te1/1/|PID

NAME: "Te1/1/3", DESCR: "10/100/1000BaseTX SFP"

PID:                     , VID:      , SN: AGS0951L1TV

NAME: "Te1/1/4", DESCR: "10/100/1000BaseTX SFP"

PID: GLC-T               , VID:      , SN: MTC1830060S

ES2#

[balaji.bandi]

post the full output  ES2#sh version