SNMP - modify IF Bandwitch

[JeroenGeldhof]

Hi,

The ifspeed OID 1.3.6.1.2.1.2.2.1.5 in RFC1213 is read-only.  Is there any other OID/MIB that allows to configure the Bandwitch through SNMP?

Best regards,

Jeroen

[Collin Clark]

What do you mean? Set the physical port to 10, 100 or 1000mbps? Set the bandwidth statement under the interface?

[JeroenGeldhof]

Hi Collin, 

indeed we mean the port setting.  1Gbps, 10Gbps, 10Mbps, 100Mbps.

Best regards,
Jeroen