Switching

Discuss Catalyst brand switches with peers and experts.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel

Labels

Forum Posts

Hi  I noticed that I can telnet my router after like 1 day even SSH is not accepting my password. % Authentication failed % Authentication failed % Authentication failed I checked the router log got this message 780278: Apr  2 06:15:28.676: %AAA-...

Jackong by Level 1
  • 2011 Views
  • 4 replies
  • 0 Helpful votes

Hey Guys,    i'm having a scenario to share.Please help me to find the answer. I'm having an office in LA in which all the PC's are connected to it and also a printer. I'm also having an office in NY in which working in same network series and PC's,...

hello all! I am currently running my network Cisco Router 2811 and catalyst 3560 switch at home, and recently added Cisco AP 1142N to use it practice wireless lap. I've connected all the cables as I should and tried to control the AP from either rout...

I recently got a ws-x4516-10ge but it does not post. I noticed that the sodimm slot on the board is not populated and suspect that is the culprit. The only information I could find about it is that Cisco specifies 512MB SODIMM SDRAM for Supervisor En...

KuRue0202 by Level 1
  • 336 Views
  • 4 replies
  • 0 Helpful votes

Hello, I want to add a new cisco switch WS-C2960X-24PS-L to a existing stack cisco stack switches ws-2960s-48FPD-L. Cisco switches details mention below Existing Stack Switches model Switch Ports Model SW Version SW Image ---...

ashfaqmd by Level 1
  • 1265 Views
  • 7 replies
  • 0 Helpful votes

Hi, Here's what I'm trying to get set up and working: cable modem -> possibly cisco 2801 (not sure if this will be needed) -> cisco catalyst 3750 -> (10x) 1142 access points in autonomous mode. I currently have a linksys wireless router sitting where...

wdigital1 by Level 1
  • 574 Views
  • 8 replies
  • 0 Helpful votes

Hey guys, I have a wlc 2504 with some APs connected. Is there a possibility to change the band of some APs from 2,4GHz to 5GHz only? And where can I see which band is currently configured/active? Thank in advance!

Hello, We have encounter a problem when trying to consolidation OSPF adjacency. We ended up rollback the changes, but here is the issue and hopefully someone has a much better idea and we really appreciate your helps: Two Nexus 7000k core switches,...

Yun Pan by Level 1
  • 889 Views
  • 6 replies
  • 0 Helpful votes