11-15-2013 07:21 AM - edited 03-07-2019 04:38 PM
Hi
We are unable to configure snmp v3 on the above.
Does anyone have a proper idiots guide for this ?
When adding a user there is no otion to add a "priv" level and I think this is why it doesnt work ?
snmp-server user ITOPS_IS NETMON v3 "(access)(auth)(encrypted)"
snmp-server user ITOPS_IS NETMON v3 auth sha Thissucks! (access)
Please help, this is so damned annoying .
Regards
Scott.
11-15-2013 07:55 AM
Hi,
Below config worked for me (currently used).
snmp-server group TEST v3 auth read XYZ notify XYZ
snmp-server view XYZ iso included
snmp-server user USER1 TEST v3 auth sha
snmp-server host
hth
MS
11-15-2013 08:12 AM
Thats what I have been trying but do not get the "priv" option when adding the user.
11-15-2013 09:11 AM
I guess you already created group. View also enabled? Not sure, if this is mandatory. Its been long time since I set this up and I remember doing some back and forth testing with settings.
Thx
MS
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide